初始化仓库
This commit is contained in:
349
Source/iic.c
Normal file
349
Source/iic.c
Normal file
@@ -0,0 +1,349 @@
|
||||
#include "iic.h"
|
||||
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
// @brief 内部使用用户无需关心
|
||||
// @param NULL
|
||||
// @return void
|
||||
// Sample usage: 无需用户调用，用户请使用h文件中的宏定义
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
void iic_delay_us(uint16 x) //33.1776Mhz
|
||||
{
|
||||
uint8 i;
|
||||
while(x--)
|
||||
{
|
||||
i = 9;
|
||||
while (--i);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
// @brief 内部使用用户无需关心
|
||||
// @param NULL
|
||||
// @return void
|
||||
// Sample usage: 无需用户调用，用户请使用h文件中的宏定义
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
uint8 wait(void)
|
||||
{
|
||||
uint16 count = 0;
|
||||
uint8 ret = IIC_SEND_OK;
|
||||
while (!(I2CMSST & 0x40))
|
||||
{
|
||||
iic_delay_us(1);
|
||||
if(count++ >= 30)//等待超过30us，则退出等待。
|
||||
{
|
||||
ret = IIC_SEND_FAIL;
|
||||
break;
|
||||
}
|
||||
}
|
||||
I2CMSST &= ~0x40;
|
||||
return ret;
|
||||
}
|
||||
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
// @brief 内部使用用户无需关心
|
||||
// @param NULL
|
||||
// @return void
|
||||
// Sample usage: 无需用户调用，用户请使用h文件中的宏定义
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
uint8 start(void)
|
||||
{
|
||||
uint8 ret;
|
||||
I2CMSCR = 0x01; //发送start命令
|
||||
ret = wait();
|
||||
return ret;
|
||||
}
|
||||
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
// @brief 内部使用用户无需关心
|
||||
// @param NULL
|
||||
// @return void
|
||||
// Sample usage: 无需用户调用，用户请使用h文件中的宏定义
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
uint8 send_data(char dat)
|
||||
{
|
||||
uint8 ret;
|
||||
I2CTXD = dat; //写数据到数据缓冲区
|
||||
I2CMSCR = 0x02; //发送SEND命令
|
||||
ret = wait();
|
||||
return ret;
|
||||
}
|
||||
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
// @brief 内部使用用户无需关心
|
||||
// @param NULL
|
||||
// @return void
|
||||
// Sample usage: 无需用户调用，用户请使用h文件中的宏定义
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
uint8 recv_ack(void)
|
||||
{
|
||||
uint8 ret;
|
||||
I2CMSCR = 0x03; //发送读ACK命令
|
||||
ret = wait();
|
||||
return ret;
|
||||
}
|
||||
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
// @brief 内部使用用户无需关心
|
||||
// @param NULL
|
||||
// @return void
|
||||
// Sample usage: 无需用户调用，用户请使用h文件中的宏定义
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
char recv_data(void) //接收数据
|
||||
{
|
||||
I2CMSCR = 0x04; //发送RECV命令
|
||||
wait();
|
||||
return I2CRXD;
|
||||
}
|
||||
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
// @brief 内部使用用户无需关心
|
||||
// @param NULL
|
||||
// @return void
|
||||
// Sample usage: 无需用户调用，用户请使用h文件中的宏定义
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
uint8 send_ack(void)
|
||||
{
|
||||
uint8 ret;
|
||||
I2CMSST = 0x00; //设置ACK信号
|
||||
I2CMSCR = 0x05; //发送ACK命令
|
||||
ret = wait();
|
||||
return ret;
|
||||
}
|
||||
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
// @brief 内部使用用户无需关心
|
||||
// @param NULL
|
||||
// @return void
|
||||
// Sample usage: 无需用户调用，用户请使用h文件中的宏定义
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
void send_nak(void)
|
||||
{
|
||||
I2CMSST = 0x01; //设置NAK信号
|
||||
I2CMSCR = 0x05; //发送ACK命令
|
||||
wait();
|
||||
}
|
||||
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
// @brief 内部使用用户无需关心
|
||||
// @param NULL
|
||||
// @return void
|
||||
// Sample usage: 无需用户调用，用户请使用h文件中的宏定义
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
uint8 stop(void)
|
||||
{
|
||||
uint8 ret;
|
||||
I2CMSCR = 0x06; //发送stop命令
|
||||
ret = wait();
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
//#define UNUSED(expr1, expr2) do { if(scl_pin == sda_pin); } while (0)
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
// @brief 硬件IIC初始化
|
||||
// @param iic_n 选择IIC模块
|
||||
// @param wait_time I2C总线速度（等待时钟数）控制: 速度设置为等待wait_time*2+1个时钟
|
||||
// @return void
|
||||
// Sample usage:
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
void iic_init(IICN_enum iic_n, uint8 wait_time)
|
||||
{
|
||||
//UNUSED(scl_pin);
|
||||
//__attribute__ ((unused))(sda_pin);
|
||||
//UNUSED(scl_pin, sda_pin);
|
||||
|
||||
P_SW2 &= ~(0x03<<4);
|
||||
P_SW2 |= 1<<7; //将EAXFR寄存器置1，这样才能使用特殊功能寄存器为扩展SFR，访问逻辑地址位于 XDATA 区域
|
||||
switch(iic_n)
|
||||
{
|
||||
case IIC_1:
|
||||
P_SW2 |= (0x00<<4); //SCL:P1.5 SDA:P1.4
|
||||
break;
|
||||
case IIC_2:
|
||||
P_SW2 |= (0x01<<4); //SCL:P2.5 SDA:P2.4
|
||||
break;
|
||||
case IIC_3:
|
||||
P_SW2 |= (0x02<<4); //SCL:P7.7 SDA:P7.6
|
||||
break;
|
||||
case IIC_4:
|
||||
P_SW2 |= (0x03<<4); //SCL:P3.2 SDA:P3.3
|
||||
break;
|
||||
}
|
||||
|
||||
I2CCFG |= 1<<6; //主机模式
|
||||
I2CCFG |= 1<<7; //使能IIC
|
||||
I2CCFG |= wait_time&0x3F;//速度设置为等待wait_time*2+1个时钟
|
||||
I2CMSST = 0x00; //主机状态寄存器
|
||||
|
||||
}
|
||||
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
// @brief 写入一个字节数据到I2C设备指定寄存器地址
|
||||
// @param iic_n IIC模块(IIC_1,IIC_2,IIC_3,IIC_0)
|
||||
// @param slaveid 从机地址(7位地址)
|
||||
// @param reg 从机寄存器地址
|
||||
// @param dat 需要发送的数据
|
||||
// @return 返回的状态值 0：成功 1：失败
|
||||
// @since v2.0
|
||||
// Sample usage: iic_write_reg(0x2D, 0x50,2); //写入数据2到0x50地址，从机地址为0x2D
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
uint8 iic_write_reg(uint8 dev_add, uint8 reg, uint8 dat)
|
||||
{
|
||||
if(start() != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
if(send_data((dev_add<<1) | 0x00) != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
if(recv_ack() != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
if(send_data(reg) != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
if(recv_ack() != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
if(send_data(dat) != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
if(recv_ack() != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
if(stop() != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
|
||||
|
||||
return IIC_SEND_OK;
|
||||
}
|
||||
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
// @brief 读取I2C设备指定地址寄存器的数据
|
||||
// @param iic_n I2C通道号及引脚
|
||||
// @param dev_add 从机地址(7位地址)
|
||||
// @param reg 从机寄存器地址
|
||||
// @param dat 数据地址
|
||||
// @return 读取的寄存器值
|
||||
// @since v1.0
|
||||
// Sample usage: uint8 value = iic_read_reg(i2c0, 0x2D, 0x50);//读取0x50地址的数据，从机地址为0x2D
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
uint8 iic_read_reg(uint8 dev_add, uint8 reg, uint8 *dat)
|
||||
{
|
||||
if(start() != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
|
||||
if(send_data((dev_add<<1) | 0x00) != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
if(recv_ack() != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
|
||||
if(send_data(reg) != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
if(recv_ack() != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
|
||||
|
||||
// if(start() != IIC_SEND_OK)
|
||||
// return IIC_SEND_FAIL;
|
||||
|
||||
if(send_data((dev_add<<1) | 0x01) != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
|
||||
if(recv_ack() != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
|
||||
|
||||
*dat = recv_data(); //读取数据
|
||||
|
||||
|
||||
if(send_ack() != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
|
||||
if(stop() != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
|
||||
return IIC_SEND_OK;
|
||||
}
|
||||
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
// @brief 读取I2C设备指定地址寄存器的数据
|
||||
// @param iic_n I2C通道号及引脚
|
||||
// @param dev_add 从机地址(7位地址)
|
||||
// @param reg 从机寄存器地址
|
||||
// @param dat 读取的数据存储的地址
|
||||
// @param num 读取字节数
|
||||
// @return void
|
||||
// @since v1.0
|
||||
// Sample usage: uint8 value = i2c_read_reg(i2c0, 0x2D, 0x50, 10, buf);//读取0x50地址的数据，从机地址为0x2D开始的10个字节
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
uint8 iic_read_reg_bytes(uint8 dev_add, uint8 reg
|
||||
, uint8 *dat, uint8 num)
|
||||
{
|
||||
|
||||
if(start() != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
|
||||
if(send_data((dev_add<<1) | 0x00) != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
if(recv_ack() != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
|
||||
if(send_data(reg) != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
if(recv_ack() != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
|
||||
if(send_data((dev_add<<1) | 0x01) != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
if(recv_ack() != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
|
||||
while(--num)
|
||||
{
|
||||
*dat = recv_data(); //读取数据
|
||||
if(send_ack() != IIC_SEND_OK)
|
||||
{
|
||||
return IIC_SEND_FAIL;
|
||||
}
|
||||
dat++;
|
||||
}
|
||||
|
||||
*dat = recv_data();
|
||||
|
||||
if(send_ack() != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
|
||||
if(stop() != IIC_SEND_OK)
|
||||
return IIC_SEND_FAIL;
|
||||
|
||||
return IIC_SEND_OK;
|
||||
}
|
||||
|
||||
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
// @brief 硬件IIC引脚切换函数
|
||||
// @param iic_n I2C通道号及引脚
|
||||
// @param scl_pin 选择SCL引脚
|
||||
// @param sda_pin 选择SDA引脚
|
||||
// Sample usage:
|
||||
//-------------------------------------------------------------------------------------------------------------------
|
||||
void iic_change_pin(IICN_enum iic_n)
|
||||
{
|
||||
P_SW2 |= 1<<7; //将EAXFR寄存器置1，这样才能使用特殊功能寄存器为扩展SFR，访问逻辑地址位于 XDATA 区域
|
||||
|
||||
P_SW2 &= ~(0x03<<4); //清除引脚切换位
|
||||
switch(iic_n)
|
||||
{
|
||||
case IIC_1:
|
||||
P_SW2 |= (0x00<<4); //SCL:P1.5 SDA:P1.4
|
||||
break;
|
||||
case IIC_2:
|
||||
P_SW2 |= (0x01<<4); //SCL:P2.5 SDA:P2.4
|
||||
break;
|
||||
case IIC_3:
|
||||
P_SW2 |= (0x02<<4); //SCL:P7.7 SDA:P7.6
|
||||
break;
|
||||
case IIC_4:
|
||||
P_SW2 |= (0x03<<4); //SCL:P3.2 SDA:P3.3
|
||||
break;
|
||||
}
|
||||
|
||||
P_SW2 &= ~(1<<7);
|
||||
|
||||
}
|
||||
Reference in New Issue
Block a user