241 lines
12 KiB
JSON
241 lines
12 KiB
JSON
{
|
|
"Language": "Language",
|
|
"English": "English",
|
|
"Chinese": "中文",
|
|
"Guest": "Guest",
|
|
"Login": "Login",
|
|
"Logout": "Logout",
|
|
"Home": "Home",
|
|
"New Slice": "New Slice",
|
|
"My Files": "My Files",
|
|
"Admin Options": "Admin Options",
|
|
"System Settings": "System Settings",
|
|
"User Management": "User Management",
|
|
"Dashboard": "Dashboard",
|
|
"Total Prints": "Total Prints",
|
|
"You have sliced": "You have sliced",
|
|
"files": "files.",
|
|
"Upload & Slice STL": "Upload & Slice STL",
|
|
"Select STL File": "Select STL File",
|
|
"Quality Profile": "Quality Profile",
|
|
"Upload & Slice": "Upload & Slice",
|
|
"3D Preview Area": "3D Preview Area",
|
|
"Upload a file to display": "Upload a file to display",
|
|
"Date Uploaded": "Date Uploaded",
|
|
"Original Name": "Original Name",
|
|
"Status": "Status",
|
|
"Actions": "Actions",
|
|
"Uploaded": "Uploaded",
|
|
"Waiting": "Waiting",
|
|
"Other Settings": "Other Settings",
|
|
"Infill Density": "Infill Density",
|
|
"Support": "Support",
|
|
"None": "None",
|
|
"Touching Buildplate": "Touching Buildplate",
|
|
"Everywhere": "Everywhere",
|
|
"Merging": "Merging",
|
|
"Waiting in queue for slicing": "Waiting in queue for slicing",
|
|
"Slicing": "Slicing",
|
|
"Sliced": "Sliced",
|
|
"Failed": "Failed",
|
|
"Download GCode": "Download GCode",
|
|
"GCode Preview": "GCode Preview",
|
|
"Delete": "Delete",
|
|
"No files uploaded yet.": "No files uploaded yet.",
|
|
"Drag & Drop STL files here or Click to Select": "Drag & Drop STL files here or Click to Select",
|
|
"Uploading...": "Uploading...",
|
|
"Simplifying": "Simplifying",
|
|
"Simplifying...": "Simplifying...",
|
|
"Proxy Skip Size (MB)": "Proxy Skip Size (MB)",
|
|
"Files smaller than this will not generate a simplified proxy.": "Files smaller than this will not generate a simplified proxy.",
|
|
"Slicing queued!": "Slicing queued!",
|
|
"Draft Quality": "Draft Quality",
|
|
"Standard Quality": "Standard Quality",
|
|
"High Quality": "High Quality",
|
|
"Dynamic Quality": "Dynamic Quality",
|
|
"Low Quality": "Low Quality",
|
|
"Super Quality": "Super Quality",
|
|
"Ultra Quality": "Ultra Quality",
|
|
"Plater": "Plater",
|
|
"Layer Progress:": "Layer Progress:",
|
|
"Loading and Parsing GCode Data...": "Loading and Parsing GCode Data...",
|
|
"Failed to load GCode preview.": "Failed to load GCode preview.",
|
|
"Outer Wall": "Outer Wall",
|
|
"Inner Wall": "Inner Wall",
|
|
"Infill": "Infill",
|
|
"Skin/TopBottom": "Skin/TopBottom",
|
|
"Travel (Move)": "Travel (Move)",
|
|
"Skirt": "Skirt",
|
|
"Support Interface": "Support Interface",
|
|
"Back": "Back",
|
|
"Layer": "Layer",
|
|
"Plater / Build Plate": "Plater / Build Plate",
|
|
"Translate (W)": "Translate (W)",
|
|
"Rotate (E)": "Rotate (E)",
|
|
"Scale (R)": "Scale (R)",
|
|
"Scale": "Scale",
|
|
"Uniform Scale": "Uniform Scale",
|
|
"Lay Flat": "Lay Flat",
|
|
"Remove Selected (Del)": "Remove Selected (Del)",
|
|
"Available Models": "Available Models",
|
|
"No STL models uploaded yet. Go upload some first.": "No STL models uploaded yet. Go upload some first.",
|
|
"Support Type": "Support Type",
|
|
"Tree": "Tree",
|
|
"Lines": "Lines",
|
|
"Grid": "Grid",
|
|
"Triangles": "Triangles",
|
|
"Concentric": "Concentric",
|
|
"Zig Zag": "Zig Zag",
|
|
"Cross": "Cross",
|
|
"Gyroid": "Gyroid",
|
|
"Honeycomb": "Honeycomb",
|
|
"Octagon": "Octagon",
|
|
"Clear Board": "Clear Board",
|
|
"Merge & Slice": "Merge & Slice",
|
|
"Error loading STL model file.": "Error loading STL model file.",
|
|
"Please add at least one model to the build plate.": "Please add at least one model to the build plate.",
|
|
"One or more models are outside the print area. Please adjust them before slicing.": "One or more models are outside the print area. Please adjust them before slicing.",
|
|
"Error:": "Error:",
|
|
"ID": "ID",
|
|
"Username": "Username",
|
|
"Role": "Role",
|
|
"Created At": "Created At",
|
|
"Admin": "Admin",
|
|
"User": "User",
|
|
"WARNING: Are you sure you want to permanently delete this user AND ALL their uploaded files and G-codes?": "WARNING: Are you sure you want to permanently delete this user AND ALL their uploaded files and G-codes?",
|
|
"SliceEngine Configurations": "SliceEngine Configurations",
|
|
"Plater Origin Offset X (mm)": "Plater Origin Offset X (mm)",
|
|
"Adjust the X-axis compilation offset for combined files on the build plate.": "Adjust the X-axis compilation offset for combined files on the build plate.",
|
|
"Plater Origin Offset Y (mm)": "Plater Origin Offset Y (mm)",
|
|
"Adjust the Y-axis compilation offset for combined files on the build plate.": "Adjust the Y-axis compilation offset for combined files on the build plate.",
|
|
"Default Plater Settings": "Default Plater Settings",
|
|
"Default Infill Density (%)": "Default Infill Density (%)",
|
|
"Default Support": "Default Support",
|
|
"Default Support Type": "Default Support Type",
|
|
"Default Quality Profile": "Default Quality Profile",
|
|
"Save Settings": "Save Settings",
|
|
"You are editing a composite model. The existing composite will be updated and re-sliced. Continue?": "You are editing a composite model. The existing composite will be updated and re-sliced. Continue?",
|
|
"Select": "Select",
|
|
"OctoPrint settings updated": "OctoPrint settings updated",
|
|
"Settings updated successfully": "Settings updated successfully",
|
|
"This model has already been sliced. The existing GCode will be overwritten. Continue?": "This model has already been sliced. The existing GCode will be overwritten. Continue?",
|
|
"Print starting! Going to dashboard...": "Print starting! Going to dashboard...",
|
|
"Are you sure you want to delete this file?": "Are you sure you want to delete this file?",
|
|
"OctoPrint Base URL": "OctoPrint Base URL",
|
|
"Temperatures": "Temperatures",
|
|
"Notice": "Notice",
|
|
"Please upload valid .stl files!": "Please upload valid .stl files!",
|
|
"Print Time:": "Print Time:",
|
|
"System Configuration": "System Configuration",
|
|
"Command": "Command",
|
|
"Time Left:": "Time Left:",
|
|
"Yes": "Yes",
|
|
"Current State": "Current State",
|
|
"Error updating settings": "Error updating settings",
|
|
"Available Files on Printer": "Available Files on Printer",
|
|
"Control failed: ": "Control failed: ",
|
|
"Loading webcam stream...": "Loading webcam stream...",
|
|
"Live Webcam": "Live Webcam",
|
|
"No printable files found. Go slice some G-Code first!": "No printable files found. Go slice some G-Code first!",
|
|
"Save Connection Settings": "Save Connection Settings",
|
|
"Upload error.": "Upload error.",
|
|
"Validation Failed": "Validation Failed",
|
|
"Cancel Print": "Cancel Print",
|
|
"Send this file to print immediately?": "Send this file to print immediately?",
|
|
"Print Now": "Print Now",
|
|
"OctoPrint Panel (Embedded)": "OctoPrint Panel (Embedded)",
|
|
"Are you sure you want to perform this action?": "Are you sure you want to perform this action?",
|
|
"Control": "Control",
|
|
"Cancel": "Cancel",
|
|
"sent.": "sent.",
|
|
"The local IP address or hostname of your OctoPrint server.": "The local IP address or hostname of your OctoPrint server.",
|
|
"OctoPrint Panel": "OctoPrint Panel",
|
|
"General Operations": "General Operations",
|
|
"Confirm": "Confirm",
|
|
"Basic Control": "Basic Control",
|
|
"Size:": "Size:",
|
|
"Prepare Print": "Prepare Print",
|
|
"API Key / Application Key": "API Key / Application Key",
|
|
"Configuration Required:": "Configuration Required:",
|
|
"Paste API Key here": "Paste API Key here",
|
|
"Tool/Nozzle": "Tool/Nozzle",
|
|
"Pause/Resume": "Pause/Resume",
|
|
"Can be found in OctoPrint Settings -> Application Keys or API.": "Can be found in OctoPrint Settings -> Application Keys or API.",
|
|
"Preview": "Preview",
|
|
"Pause": "Pause",
|
|
"Bed": "Bed",
|
|
"Printer Status": "Printer Status",
|
|
"Printer": "Printer",
|
|
"Admin / OctoPrint": "Admin / OctoPrint",
|
|
"Absolute path to save locally sliced GCode files (e.g. OctoPrint uploads folder like \"/home/pi/.octoprint/uploads\"). Leave empty to use system default.": "Absolute path to save locally sliced GCode files (e.g. OctoPrint uploads folder like \"/home/pi/.octoprint/uploads\"). Leave empty to use system default.",
|
|
"Custom GCode Output Folder": "Custom GCode Output Folder",
|
|
"Go to Configuration": "Go to Configuration",
|
|
"OK": "OK",
|
|
"Connection Settings": "Connection Settings",
|
|
"OctoPrint Configuration": "OctoPrint Configuration",
|
|
"The OctoPrint URL is not set. Please go to the ": "The OctoPrint URL is not set. Please go to the ",
|
|
"Go to Print": "Go to Print",
|
|
"Time:": "Time:",
|
|
"Are you sure you want to cancel the print?": "Are you sure you want to cancel the print?",
|
|
"Uploading and linking GCode...": "Uploading and linking GCode...",
|
|
"Active Print Job": "Active Print Job",
|
|
"Upload External GCode": "Upload External GCode",
|
|
"Slicer": "Slicer",
|
|
"System Config": "System Config",
|
|
"Home All Axes": "Home All Axes",
|
|
"Pause/Resume Print": "Pause/Resume Print",
|
|
"Slice": "Slice",
|
|
"Upload failed.": "Upload failed.",
|
|
"Network error": "Network error",
|
|
"Upload Complete!": "Upload Complete!",
|
|
"Printer Control": "Printer Control",
|
|
"Error saving settings": "Error saving settings",
|
|
"page to set it up.": "page to set it up.",
|
|
"Network Error: ": "Network Error: ",
|
|
"Upload STL": "Upload STL",
|
|
"Please upload a valid .stl file!": "Please upload a valid .stl file!",
|
|
"3D Model Files (STL)": "3D Model Files (STL)",
|
|
"You have uploaded": "You have uploaded",
|
|
"Total Space Used": "Total Space Used",
|
|
"Sliced Files (GCode)": "Sliced Files (GCode)",
|
|
"You have sliced or uploaded": "You have sliced or uploaded",
|
|
"Default Storage Quotas (MB)": "Default Storage Quotas (MB)",
|
|
"Guest STL Quota": "Guest STL Quota",
|
|
"Unlimited": "Unlimited",
|
|
"Guest GCode Quota": "Guest GCode Quota",
|
|
"New User STL Quota": "New User STL Quota",
|
|
"New User GCode Quota": "New User GCode Quota",
|
|
"Quota": "Quota",
|
|
"GCode Storage Quota Exceeded. Please delete some files first.": "GCode Storage Quota Exceeded. Please delete some files first.",
|
|
"Edit Quota": "Edit Quota",
|
|
"Edit Quota for": "Edit Quota for",
|
|
"Reset Password": "Reset Password",
|
|
"Reset Password for": "Reset Password for",
|
|
"Save": "Save",
|
|
"STL Quota": "STL Quota",
|
|
"GCode Quota": "GCode Quota",
|
|
"New Password": "New Password",
|
|
"Add User": "Add User",
|
|
"Password": "Password",
|
|
"Is Admin": "Is Admin",
|
|
"Create User": "Create User",
|
|
"Build Plate Model Path (.stl)": "Build Plate Model Path (.stl)",
|
|
"Absolute path to a custom build plate STL model to show in the plater. Leave empty to use none.": "Absolute path to a custom build plate STL model to show in the plater. Leave empty to use none.",
|
|
"Default Material Profile": "Default Material Profile",
|
|
"Slicing Engine Configurations": "Slicing Engine Configurations",
|
|
"Slicing Engine": "Slicing Engine",
|
|
"Select the engine to be used globally. Ensure the selected engine is installed and accessible on the server.": "Select the engine to be used globally. Ensure the selected engine is installed and accessible on the server.",
|
|
"Material Profile": "Material Profile",
|
|
"Custom": "Custom",
|
|
"Skirt/Brim": "Skirt/Brim",
|
|
"Support material": "Support material",
|
|
"Perimeter": "Perimeter",
|
|
"External perimeter": "External perimeter",
|
|
"Solid infill": "Solid infill",
|
|
"Overhang perimeter": "Overhang perimeter",
|
|
"Internal infill": "Internal infill",
|
|
"Bridge infill": "Bridge infill",
|
|
"Top solid infill": "Top solid infill",
|
|
"Others": "Others",
|
|
"Are you sure you want to clear the board?": "Are you sure you want to clear the board?"
|
|
} |