有3d gcode预览，基本能按要求切片，但是缩放后切片会失败

print_config/materials/generic_petg.inst.cfg

@@ -0,0 +1,13 @@
+[values]
+material_print_temperature = 240
+material_print_temperature_layer_0 = 240
+material_initial_print_temperature = 240
+material_final_print_temperature = 240
+material_extrusion_cool_down_speed = 0.7
+material_bed_temperature = 80
+material_bed_temperature_layer_0 = 80
+material_shrinkage_percentage = 100
+material_flow = 100
+cool_fan_enabled = true
+cool_fan_speed_min = 35
+cool_fan_speed_max = 100

print_config/materials/generic_pla.inst.cfg

@@ -0,0 +1,13 @@
+[values]
+material_print_temperature = 200
+material_print_temperature_layer_0 = 205
+material_initial_print_temperature = 205
+material_final_print_temperature = 200
+material_extrusion_cool_down_speed = 0.7
+material_bed_temperature = 60
+material_bed_temperature_layer_0 = 60
+material_shrinkage_percentage = 100
+material_flow = 100
+cool_fan_enabled = true
+cool_fan_speed_min = 100
+cool_fan_speed_max = 100

print_config/printers/creality_ender3v3se.def.json

@@ -50,6 +50,9 @@
         "retraction_amount": { "value": 0.8 },
         "retraction_speed": { "default_value": 40 },
         "speed_layer_0": { "value": 30 },
-        "speed_print": { "value": 180 }
+        "speed_print": { "value": 180 },
+        "meshfix_union_all": { "value": true },
+        "meshfix_remove_duplicate_faces": { "value": true },
+        "meshfix_remove_intersecting_faces": { "value": true }
     }
 }

print_config/printers/fdmprinter.def.json

@@ -4435,7 +4435,9 @@
                         "concentric": "Concentric",
                         "zigzag": "Zig Zag",
                         "cross": "Cross",
-                        "gyroid": "Gyroid"
+                        "gyroid": "Gyroid",
+                        "honeycomb": "Honeycomb",
+                        "octagon": "Octagon"
                     },
                     "default_value": "zigzag",
                     "enabled": "support_enable or support_meshes_present",

print_config/quality/creality/presets/base_0.4_PETG_ultra.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = ultra
+material = generic_petg
+variant = 0.4mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+#retraction_extra_prime_amount = 0.5

print_config/supports/normal.inst.cfg

@@ -0,0 +1,11 @@
+[values]
+support_angle = 50.0
+support_wall_count = 1
+support_infill_rate = 15.0
+support_line_distance = 2.5
+support_brim_enable = true
+support_brim_width = 4.0
+support_z_distance = 0.2
+support_xy_distance = 0.7
+support_top_distance = 0.2
+support_bottom_distance = 0.2

print_config/supports/tree.inst.cfg

@@ -0,0 +1,22 @@
+[values]
+support_angle = 45
+support_infill_rate = 0
+support_tree_angle = 45.0
+support_tree_branch_diameter = 5.0
+support_tree_max_diameter = 25.0
+support_tree_branch_diameter_angle = 7.0
+support_tree_angle_slow = 50.0
+support_tree_max_diameter_increase_by_merges_when_support_to_model = 1.0
+support_tree_min_height_to_model = 3.0
+support_tree_bp_diameter = 7.5
+support_tree_top_rate = 15.0
+support_tree_tip_diameter = 0.4
+support_tree_limit_branch_reach = false
+support_tree_branch_reach_limit = 30.0
+support_tree_rest_preference = buildplate
+support_brim_enable = true
+support_brim_width = 4.0
+support_z_distance = 0.2
+support_xy_distance = 1.0
+support_top_distance = 0.2
+support_bottom_distance = 0.2

print_config/variants/creality/creality_ender3v3se_0.2.inst.cfg

@@ -1,12 +1,13 @@
-[general]
-name = 0.2mm Nozzle
-version = 4
-definition = creality_ender3
-
-[metadata]
-setting_version = 19
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.2
+[general]
+definition = creality_ender3v3se
+name = 0.2mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 26
+type = variant
+
+[values]
+machine_nozzle_size = 0.2
+

print_config/variants/creality/creality_ender3v3se_0.3.inst.cfg

@@ -1,12 +1,13 @@
-[general]
-name = 0.3mm Nozzle
-version = 4
-definition = creality_ender3
-
-[metadata]
-setting_version = 19
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.3
+[general]
+definition = creality_ender3v3se
+name = 0.3mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 26
+type = variant
+
+[values]
+machine_nozzle_size = 0.3
+

print_config/variants/creality/creality_ender3v3se_0.4.inst.cfg

@@ -1,12 +1,13 @@
-[general]
-name = 0.4mm Nozzle
-version = 4
-definition = creality_ender3
-
-[metadata]
-setting_version = 19
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.4
+[general]
+definition = creality_ender3v3se
+name = 0.4mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 26
+type = variant
+
+[values]
+machine_nozzle_size = 0.4
+

print_config/variants/creality/creality_ender3v3se_0.5.inst.cfg

@@ -1,12 +1,13 @@
-[general]
-name = 0.5mm Nozzle
-version = 4
-definition = creality_ender3
-
-[metadata]
-setting_version = 19
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.5
+[general]
+definition = creality_ender3v3se
+name = 0.5mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 26
+type = variant
+
+[values]
+machine_nozzle_size = 0.5
+

print_config/variants/creality/creality_ender3v3se_0.6.inst.cfg

@@ -1,12 +1,13 @@
-[general]
-name = 0.6mm Nozzle
-version = 4
-definition = creality_ender3
-
-[metadata]
-setting_version = 19
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.6
+[general]
+definition = creality_ender3v3se
+name = 0.6mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 26
+type = variant
+
+[values]
+machine_nozzle_size = 0.6
+

print_config/variants/creality/creality_ender3v3se_0.8.inst.cfg

@@ -1,12 +1,13 @@
-[general]
-name = 0.8mm Nozzle
-version = 4
-definition = creality_ender3
-
-[metadata]
-setting_version = 19
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.8
+[general]
+definition = creality_ender3v3se
+name = 0.8mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 26
+type = variant
+
+[values]
+machine_nozzle_size = 0.8
+

print_config/variants/creality/creality_ender3v3se_1.0.inst.cfg

@@ -1,12 +1,13 @@
-[general]
-name = 1.0mm Nozzle
-version = 4
-definition = creality_ender3
-
-[metadata]
-setting_version = 19
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 1.0
+[general]
+definition = creality_ender3v3se
+name = 1.0mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 26
+type = variant
+
+[values]
+machine_nozzle_size = 1.0
+