基础的切片和质量控制

2026-04-10 13:58:18 +08:00
commit 975f06eb46
3302 changed files with 650758 additions and 0 deletions
--- a/print_config/presets/creality/base/base_0.2_ABS_super.inst.cfg
+++ b/print_config/presets/creality/base/base_0.2_ABS_super.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Super Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = super
+material = generic_abs
+variant = 0.2mm Nozzle
+
+[values]
+wall_thickness = =line_width*8
--- a/print_config/presets/creality/base/base_0.2_ABS_ultra.inst.cfg
+++ b/print_config/presets/creality/base/base_0.2_ABS_ultra.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = ultra
+material = generic_abs
+variant = 0.2mm Nozzle
+
+[values]
+wall_thickness = =line_width*8
--- a/print_config/presets/creality/base/base_0.2_PETG_super.inst.cfg
+++ b/print_config/presets/creality/base/base_0.2_PETG_super.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Super Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = super
+material = generic_petg
+variant = 0.2mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*8
+#retraction_extra_prime_amount = 0.5
+
--- a/print_config/presets/creality/base/base_0.2_PETG_ultra.inst.cfg
+++ b/print_config/presets/creality/base/base_0.2_PETG_ultra.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = ultra
+material = generic_petg
+variant = 0.2mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*8
+#retraction_extra_prime_amount = 0.5
--- a/print_config/presets/creality/base/base_0.2_PLA_super.inst.cfg
+++ b/print_config/presets/creality/base/base_0.2_PLA_super.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Super Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = super
+material = generic_pla
+variant = 0.2mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.2_PLA_ultra.inst.cfg
+++ b/print_config/presets/creality/base/base_0.2_PLA_ultra.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = ultra
+material = generic_pla
+variant = 0.2mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.3_ABS_adaptive.inst.cfg
+++ b/print_config/presets/creality/base/base_0.3_ABS_adaptive.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = adaptive
+material = generic_abs
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
--- a/print_config/presets/creality/base/base_0.3_ABS_low.inst.cfg
+++ b/print_config/presets/creality/base/base_0.3_ABS_low.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Low Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = low
+material = generic_abs
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
--- a/print_config/presets/creality/base/base_0.3_ABS_standard.inst.cfg
+++ b/print_config/presets/creality/base/base_0.3_ABS_standard.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = standard
+material = generic_abs
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
--- a/print_config/presets/creality/base/base_0.3_ABS_super.inst.cfg
+++ b/print_config/presets/creality/base/base_0.3_ABS_super.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Super Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = super
+material = generic_abs
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
--- a/print_config/presets/creality/base/base_0.3_PETG_adaptive.inst.cfg
+++ b/print_config/presets/creality/base/base_0.3_PETG_adaptive.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = adaptive
+material = generic_petg
+variant = 0.3mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+#retraction_extra_prime_amount = 0.5
--- a/print_config/presets/creality/base/base_0.3_PETG_low.inst.cfg
+++ b/print_config/presets/creality/base/base_0.3_PETG_low.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Low Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = low
+material = generic_petg
+variant = 0.3mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+#retraction_extra_prime_amount = 0.5
--- a/print_config/presets/creality/base/base_0.3_PETG_standard.inst.cfg
+++ b/print_config/presets/creality/base/base_0.3_PETG_standard.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = standard
+material = generic_petg
+variant = 0.3mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+#retraction_extra_prime_amount = 0.5
--- a/print_config/presets/creality/base/base_0.3_PETG_super.inst.cfg
+++ b/print_config/presets/creality/base/base_0.3_PETG_super.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Super Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = super
+material = generic_petg
+variant = 0.3mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+#retraction_extra_prime_amount = 0.5
--- a/print_config/presets/creality/base/base_0.3_PLA_adaptive.inst.cfg
+++ b/print_config/presets/creality/base/base_0.3_PLA_adaptive.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = adaptive
+material = generic_pla
+variant = 0.3mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.3_PLA_low.inst.cfg
+++ b/print_config/presets/creality/base/base_0.3_PLA_low.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Low Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = low
+material = generic_pla
+variant = 0.3mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.3_PLA_standard.inst.cfg
+++ b/print_config/presets/creality/base/base_0.3_PLA_standard.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = standard
+material = generic_pla
+variant = 0.3mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.3_PLA_super.inst.cfg
+++ b/print_config/presets/creality/base/base_0.3_PLA_super.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Super Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = super
+material = generic_pla
+variant = 0.3mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.3_TPU_adaptive.inst.cfg
+++ b/print_config/presets/creality/base/base_0.3_TPU_adaptive.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = adaptive
+material = generic_tpu
+variant = 0.3mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.3_TPU_standard.inst.cfg
+++ b/print_config/presets/creality/base/base_0.3_TPU_standard.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = standard
+material = generic_tpu
+variant = 0.3mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.3_TPU_super.inst.cfg
+++ b/print_config/presets/creality/base/base_0.3_TPU_super.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Super Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = super
+material = generic_tpu
+variant = 0.3mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.4_ABS_adaptive.inst.cfg
+++ b/print_config/presets/creality/base/base_0.4_ABS_adaptive.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = adaptive
+material = generic_abs
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
--- a/print_config/presets/creality/base/base_0.4_ABS_low.inst.cfg
+++ b/print_config/presets/creality/base/base_0.4_ABS_low.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Low Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = low
+material = generic_abs
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
--- a/print_config/presets/creality/base/base_0.4_ABS_standard.inst.cfg
+++ b/print_config/presets/creality/base/base_0.4_ABS_standard.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = standard
+material = generic_abs
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
--- a/print_config/presets/creality/base/base_0.4_ABS_super.inst.cfg
+++ b/print_config/presets/creality/base/base_0.4_ABS_super.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Super Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = super
+material = generic_abs
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
--- a/print_config/presets/creality/base/base_0.4_PETG_adaptive.inst.cfg
+++ b/print_config/presets/creality/base/base_0.4_PETG_adaptive.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = adaptive
+material = generic_petg
+variant = 0.4mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+#retraction_extra_prime_amount = 0.5
--- a/print_config/presets/creality/base/base_0.4_PETG_low.inst.cfg
+++ b/print_config/presets/creality/base/base_0.4_PETG_low.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Low Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = low
+material = generic_petg
+variant = 0.4mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+#retraction_extra_prime_amount = 0.5
--- a/print_config/presets/creality/base/base_0.4_PETG_standard.inst.cfg
+++ b/print_config/presets/creality/base/base_0.4_PETG_standard.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = standard
+material = generic_petg
+variant = 0.4mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+#retraction_extra_prime_amount = 0.5
--- a/print_config/presets/creality/base/base_0.4_PETG_super.inst.cfg
+++ b/print_config/presets/creality/base/base_0.4_PETG_super.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Super Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = super
+material = generic_petg
+variant = 0.4mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+#retraction_extra_prime_amount = 0.5
--- a/print_config/presets/creality/base/base_0.4_PLA_adaptive.inst.cfg
+++ b/print_config/presets/creality/base/base_0.4_PLA_adaptive.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = adaptive
+material = generic_pla
+variant = 0.4mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.4_PLA_low.inst.cfg
+++ b/print_config/presets/creality/base/base_0.4_PLA_low.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Low Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = low
+material = generic_pla
+variant = 0.4mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.4_PLA_standard.inst.cfg
+++ b/print_config/presets/creality/base/base_0.4_PLA_standard.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = standard
+material = generic_pla
+variant = 0.4mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.4_PLA_super.inst.cfg
+++ b/print_config/presets/creality/base/base_0.4_PLA_super.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Super Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = super
+material = generic_pla
+variant = 0.4mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.4_TPU_adaptive.inst.cfg
+++ b/print_config/presets/creality/base/base_0.4_TPU_adaptive.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = adaptive
+material = generic_tpu
+variant = 0.4mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.4_TPU_standard.inst.cfg
+++ b/print_config/presets/creality/base/base_0.4_TPU_standard.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = standard
+material = generic_tpu
+variant = 0.4mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.4_TPU_super.inst.cfg
+++ b/print_config/presets/creality/base/base_0.4_TPU_super.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Super Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = super
+material = generic_tpu
+variant = 0.4mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.5_ABS_adaptive.inst.cfg
+++ b/print_config/presets/creality/base/base_0.5_ABS_adaptive.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = adaptive
+material = generic_abs
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
--- a/print_config/presets/creality/base/base_0.5_ABS_low.inst.cfg
+++ b/print_config/presets/creality/base/base_0.5_ABS_low.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Low Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = low
+material = generic_abs
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
--- a/print_config/presets/creality/base/base_0.5_ABS_standard.inst.cfg
+++ b/print_config/presets/creality/base/base_0.5_ABS_standard.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = standard
+material = generic_abs
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
--- a/print_config/presets/creality/base/base_0.5_ABS_super.inst.cfg
+++ b/print_config/presets/creality/base/base_0.5_ABS_super.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Super Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = super
+material = generic_abs
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
--- a/print_config/presets/creality/base/base_0.5_PETG_adaptive.inst.cfg
+++ b/print_config/presets/creality/base/base_0.5_PETG_adaptive.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = adaptive
+material = generic_petg
+variant = 0.5mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+#retraction_extra_prime_amount = 0.5
--- a/print_config/presets/creality/base/base_0.5_PETG_low.inst.cfg
+++ b/print_config/presets/creality/base/base_0.5_PETG_low.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Low Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = low
+material = generic_petg
+variant = 0.5mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+#retraction_extra_prime_amount = 0.5
--- a/print_config/presets/creality/base/base_0.5_PETG_standard.inst.cfg
+++ b/print_config/presets/creality/base/base_0.5_PETG_standard.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = standard
+material = generic_petg
+variant = 0.5mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+#retraction_extra_prime_amount = 0.5
--- a/print_config/presets/creality/base/base_0.5_PETG_super.inst.cfg
+++ b/print_config/presets/creality/base/base_0.5_PETG_super.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Super Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = super
+material = generic_petg
+variant = 0.5mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+#retraction_extra_prime_amount = 0.5
--- a/print_config/presets/creality/base/base_0.5_PLA_adaptive.inst.cfg
+++ b/print_config/presets/creality/base/base_0.5_PLA_adaptive.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = adaptive
+material = generic_pla
+variant = 0.5mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.5_PLA_low.inst.cfg
+++ b/print_config/presets/creality/base/base_0.5_PLA_low.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Low Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = low
+material = generic_pla
+variant = 0.5mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.5_PLA_standard.inst.cfg
+++ b/print_config/presets/creality/base/base_0.5_PLA_standard.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = standard
+material = generic_pla
+variant = 0.5mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.5_PLA_super.inst.cfg
+++ b/print_config/presets/creality/base/base_0.5_PLA_super.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Super Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = super
+material = generic_pla
+variant = 0.5mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.5_TPU_adaptive.inst.cfg
+++ b/print_config/presets/creality/base/base_0.5_TPU_adaptive.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = adaptive
+material = generic_tpu
+variant = 0.5mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.5_TPU_standard.inst.cfg
+++ b/print_config/presets/creality/base/base_0.5_TPU_standard.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = standard
+material = generic_tpu
+variant = 0.5mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.5_TPU_super.inst.cfg
+++ b/print_config/presets/creality/base/base_0.5_TPU_super.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Super Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = super
+material = generic_tpu
+variant = 0.5mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.6_ABS_standard.inst.cfg
+++ b/print_config/presets/creality/base/base_0.6_ABS_standard.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = standard
+material = generic_abs
+variant = 0.6mm Nozzle
+
+[values]
+wall_thickness = =line_width*3
--- a/print_config/presets/creality/base/base_0.6_PETG_standard.inst.cfg
+++ b/print_config/presets/creality/base/base_0.6_PETG_standard.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = standard
+material = generic_petg
+variant = 0.6mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*3
+#retraction_extra_prime_amount = 0.5
--- a/print_config/presets/creality/base/base_0.6_PLA_draft.inst.cfg
+++ b/print_config/presets/creality/base/base_0.6_PLA_draft.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Draft Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = draft
+material = generic_pla
+variant = 0.6mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.6_PLA_low.inst.cfg
+++ b/print_config/presets/creality/base/base_0.6_PLA_low.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Low Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = low
+material = generic_pla
+variant = 0.6mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.6_PLA_standard.inst.cfg
+++ b/print_config/presets/creality/base/base_0.6_PLA_standard.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = standard
+material = generic_pla
+variant = 0.6mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.6_TPU_standard.inst.cfg
+++ b/print_config/presets/creality/base/base_0.6_TPU_standard.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = standard
+material = generic_tpu
+variant = 0.6mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.8_ABS_draft.inst.cfg
+++ b/print_config/presets/creality/base/base_0.8_ABS_draft.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Draft Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = draft
+material = generic_abs
+variant = 0.8mm Nozzle
+
+[values]
+wall_thickness = =line_width*3
--- a/print_config/presets/creality/base/base_0.8_PETG_draft.inst.cfg
+++ b/print_config/presets/creality/base/base_0.8_PETG_draft.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Draft Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = draft
+material = generic_petg
+variant = 0.8mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*3
+#retraction_extra_prime_amount = 0.5
--- a/print_config/presets/creality/base/base_0.8_PLA_draft.inst.cfg
+++ b/print_config/presets/creality/base/base_0.8_PLA_draft.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Draft Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = draft
+material = generic_pla
+variant = 0.8mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_0.8_TPU_draft.inst.cfg
+++ b/print_config/presets/creality/base/base_0.8_TPU_draft.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Draft Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = draft
+material = generic_tpu
+variant = 0.8mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_1.0_ABS_draft.inst.cfg
+++ b/print_config/presets/creality/base/base_1.0_ABS_draft.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Draft Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = draft
+material = generic_abs
+variant = 1.0mm Nozzle
+
+[values]
+wall_thickness = =line_width*3
--- a/print_config/presets/creality/base/base_1.0_PETG_draft.inst.cfg
+++ b/print_config/presets/creality/base/base_1.0_PETG_draft.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Draft Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = draft
+material = generic_petg
+variant = 1.0mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*3
+#retraction_extra_prime_amount = 0.5
--- a/print_config/presets/creality/base/base_1.0_PLA_draft.inst.cfg
+++ b/print_config/presets/creality/base/base_1.0_PLA_draft.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Draft Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = draft
+material = generic_pla
+variant = 1.0mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_1.0_TPU_draft.inst.cfg
+++ b/print_config/presets/creality/base/base_1.0_TPU_draft.inst.cfg
@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Draft Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = draft
+material = generic_tpu
+variant = 1.0mm Nozzle
+
+[values]
--- a/print_config/presets/creality/base/base_global_adaptive.inst.cfg
+++ b/print_config/presets/creality/base/base_global_adaptive.inst.cfg
@@ -0,0 +1,19 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = adaptive
+weight = -2
+global_quality = True
+
+[values]
+layer_height = 0.16
+layer_height_0 = 0.20
+top_bottom_thickness = =layer_height_0+layer_height*4
+wall_thickness = =line_width*3
+support_interface_height = =layer_height*6
+adaptive_layer_height_enabled = true
--- a/print_config/presets/creality/base/base_global_draft.inst.cfg
+++ b/print_config/presets/creality/base/base_global_draft.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Draft Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = draft
+weight = -5
+global_quality = True
+
+[values]
+layer_height = 0.32
+layer_height_0 = 0.32
+top_bottom_thickness = =layer_height_0+layer_height*3
+wall_thickness = =line_width*2
+support_interface_height = =layer_height*4
--- a/print_config/presets/creality/base/base_global_low.inst.cfg
+++ b/print_config/presets/creality/base/base_global_low.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Low Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = low
+weight = -4
+global_quality = True
+
+[values]
+layer_height = 0.28
+layer_height_0 = 0.28
+top_bottom_thickness = =layer_height_0+layer_height*3
+wall_thickness = =line_width*2
+support_interface_height = =layer_height*4
--- a/print_config/presets/creality/base/base_global_standard.inst.cfg
+++ b/print_config/presets/creality/base/base_global_standard.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = standard
+weight = -3
+global_quality = True
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.2
+top_bottom_thickness = =layer_height_0+layer_height*3
+wall_thickness = =line_width*2
+support_interface_height = =layer_height*4
--- a/print_config/presets/creality/base/base_global_super.inst.cfg
+++ b/print_config/presets/creality/base/base_global_super.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Super Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = super
+weight = -1
+global_quality = True
+
+[values]
+layer_height = 0.12
+layer_height_0 = 0.12
+top_bottom_thickness = =layer_height_0+layer_height*6
+wall_thickness = =line_width*3
+support_interface_height = =layer_height*8
--- a/print_config/presets/creality/base/base_global_ultra.inst.cfg
+++ b/print_config/presets/creality/base/base_global_ultra.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = quality
+quality_type = ultra
+weight = 0
+global_quality = True
+
+[values]
+layer_height = 0.08
+layer_height_0 = 0.12
+top_bottom_thickness = =layer_height_0+layer_height*10
+wall_thickness = =line_width*3
+support_interface_height = =layer_height*12
--- a/print_config/presets/variants/creality_base_0.2.inst.cfg
+++ b/print_config/presets/variants/creality_base_0.2.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+name = 0.2mm Nozzle
+version = 4
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.2
--- a/print_config/presets/variants/creality_base_0.3.inst.cfg
+++ b/print_config/presets/variants/creality_base_0.3.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+name = 0.3mm Nozzle
+version = 4
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.3
--- a/print_config/presets/variants/creality_base_0.4.inst.cfg
+++ b/print_config/presets/variants/creality_base_0.4.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+name = 0.4mm Nozzle
+version = 4
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.4
--- a/print_config/presets/variants/creality_base_0.5.inst.cfg
+++ b/print_config/presets/variants/creality_base_0.5.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+name = 0.5mm Nozzle
+version = 4
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.5
--- a/print_config/presets/variants/creality_base_0.6.inst.cfg
+++ b/print_config/presets/variants/creality_base_0.6.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+name = 0.6mm Nozzle
+version = 4
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.6
--- a/print_config/presets/variants/creality_base_0.8.inst.cfg
+++ b/print_config/presets/variants/creality_base_0.8.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+name = 0.8mm Nozzle
+version = 4
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.8
--- a/print_config/presets/variants/creality_base_1.0.inst.cfg
+++ b/print_config/presets/variants/creality_base_1.0.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+name = 1.0mm Nozzle
+version = 4
+definition = creality_base
+
+[metadata]
+setting_version = 19
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 1.0
--- a/print_config/presets/variants/creality_ender3_0.2.inst.cfg
+++ b/print_config/presets/variants/creality_ender3_0.2.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+name = 0.2mm Nozzle
+version = 4
+definition = creality_ender3
+
+[metadata]
+setting_version = 19
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.2
--- a/print_config/presets/variants/creality_ender3_0.3.inst.cfg
+++ b/print_config/presets/variants/creality_ender3_0.3.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+name = 0.3mm Nozzle
+version = 4
+definition = creality_ender3
+
+[metadata]
+setting_version = 19
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.3
--- a/print_config/presets/variants/creality_ender3_0.4.inst.cfg
+++ b/print_config/presets/variants/creality_ender3_0.4.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+name = 0.4mm Nozzle
+version = 4
+definition = creality_ender3
+
+[metadata]
+setting_version = 19
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.4
--- a/print_config/presets/variants/creality_ender3_0.5.inst.cfg
+++ b/print_config/presets/variants/creality_ender3_0.5.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+name = 0.5mm Nozzle
+version = 4
+definition = creality_ender3
+
+[metadata]
+setting_version = 19
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.5
--- a/print_config/presets/variants/creality_ender3_0.6.inst.cfg
+++ b/print_config/presets/variants/creality_ender3_0.6.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+name = 0.6mm Nozzle
+version = 4
+definition = creality_ender3
+
+[metadata]
+setting_version = 19
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.6
--- a/print_config/presets/variants/creality_ender3_0.8.inst.cfg
+++ b/print_config/presets/variants/creality_ender3_0.8.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+name = 0.8mm Nozzle
+version = 4
+definition = creality_ender3
+
+[metadata]
+setting_version = 19
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.8
--- a/print_config/presets/variants/creality_ender3_1.0.inst.cfg
+++ b/print_config/presets/variants/creality_ender3_1.0.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+name = 1.0mm Nozzle
+version = 4
+definition = creality_ender3
+
+[metadata]
+setting_version = 19
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 1.0