lhye200/AIO_3D_Print_Web_Platform
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

大修参数，改prusa版本到2.9.4

Browse Source 
Co-authored-by: Copilot <copilot@github.com>
This commit is contained in:
lhye200
2026-04-29 01:01:24 +08:00
parent 2dbecfe0d4
commit 72e3a165ac
21 changed files with 402 additions and 306 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
print_config/prusa_slicer/materials/CR-PETG.ini
View File

@@ -4,7 +4,9 @@ material_type = petg
[settings]
filament_adhesiveness_category = 300
; filament_adhesiveness_category = 300
idle_temperature = 160
first_layer_bed_temperature = 70
cool_plate_temp = 70
eng_plate_temp = 0
hot_plate_temp = 70

4
print_config/prusa_slicer/materials/CR-PLA.ini
View File

@@ -4,6 +4,8 @@ material_type = pla
[settings]
idle_temperature = 150
first_layer_bed_temperature = 60
cool_plate_temp = 50
eng_plate_temp = 45
hot_plate_temp = 50
@@ -50,7 +52,7 @@ slow_down_layer_time = 6
filament_start_gcode = ;filament start gcode
nozzle_temperature = 190
temperature_vitrification = 100
filament_adhesiveness_category = 100
; filament_adhesiveness_category = 100
nozzle_temperature_range_low = 190
nozzle_temperature_range_high = 240
additional_cooling_fan_speed = 0

4
print_config/prusa_slicer/materials/Generic_PETG.ini
View File

@@ -4,7 +4,9 @@ material_type = petg
[settings]
filament_adhesiveness_category = 300
; filament_adhesiveness_category = 300
idle_temperature = 160
first_layer_bed_temperature = 70
cool_plate_temp = 60
eng_plate_temp = 0
hot_plate_temp = 70

4
print_config/prusa_slicer/materials/Generic_TPU.ini
View File

@@ -4,6 +4,8 @@ material_type = tpu
[settings]
idle_temperature = 130
first_layer_bed_temperature = 55
cool_plate_temp = 30
eng_plate_temp = 30
hot_plate_temp = 30
@@ -50,7 +52,7 @@ slow_down_layer_time = 12
filament_start_gcode = ;filament start gcode\n
nozzle_temperature = 200
temperature_vitrification = 60
filament_adhesiveness_category = 600
; filament_adhesiveness_category = 600
additional_cooling_fan_speed = 0
nozzle_temperature_range_low = 200
nozzle_temperature_range_high = 250

4
print_config/prusa_slicer/materials/Hyper_L-W_PLA.ini
View File

@@ -4,6 +4,8 @@ material_type = pla
[settings]
idle_temperature = 150
first_layer_bed_temperature = 60
cool_plate_temp = 50
eng_plate_temp = 45
hot_plate_temp = 60
@@ -50,7 +52,7 @@ slow_down_layer_time = 10
filament_start_gcode = ;filament start gcode
nozzle_temperature = 220
temperature_vitrification = 60
filament_adhesiveness_category = 100
; filament_adhesiveness_category = 100
nozzle_temperature_range_low = 200
nozzle_temperature_range_high = 270
additional_cooling_fan_speed = 0

4
print_config/prusa_slicer/materials/Hyper_Marble_PLA.ini
View File

@@ -4,6 +4,8 @@ material_type = pla
[settings]
idle_temperature = 150
first_layer_bed_temperature = 60
cool_plate_temp = 50
eng_plate_temp = 45
hot_plate_temp = 50
@@ -50,7 +52,7 @@ slow_down_layer_time = 14
filament_start_gcode = ;filament start gcode
nozzle_temperature = 220
temperature_vitrification = 60
filament_adhesiveness_category = 100
; filament_adhesiveness_category = 100
nozzle_temperature_range_low = 190
nozzle_temperature_range_high = 240
additional_cooling_fan_speed = 0

3
print_config/prusa_slicer/materials/Hyper_PETG.ini
View File

@@ -4,7 +4,8 @@ material_type = petg
[settings]
filament_adhesiveness_category = 300
; filament_adhesiveness_category = 300
idle_temperature = 160
cool_plate_temp = 60
eng_plate_temp = 0
hot_plate_temp = 70

4
print_config/prusa_slicer/materials/Hyper_PLA.ini
View File

@@ -4,6 +4,8 @@ material_type = pla
[settings]
idle_temperature = 150
first_layer_bed_temperature = 60
cool_plate_temp = 50
eng_plate_temp = 45
hot_plate_temp = 50
@@ -50,7 +52,7 @@ slow_down_layer_time = 6
filament_start_gcode = ;filament start gcode
nozzle_temperature = 190
temperature_vitrification = 100
filament_adhesiveness_category = 100
; filament_adhesiveness_category = 100
nozzle_temperature_range_low = 190
nozzle_temperature_range_high = 240
additional_cooling_fan_speed = 0

4
print_config/prusa_slicer/materials/Hyper_Stardust_PLA.ini
View File

@@ -4,6 +4,8 @@ material_type = pla
[settings]
idle_temperature = 150
first_layer_bed_temperature = 60
cool_plate_temp = 50
eng_plate_temp = 45
hot_plate_temp = 50
@@ -50,7 +52,7 @@ slow_down_layer_time = 14
filament_start_gcode = ;filament start gcode
nozzle_temperature = 220
temperature_vitrification = 60
filament_adhesiveness_category = 100
; filament_adhesiveness_category = 100
nozzle_temperature_range_low = 190
nozzle_temperature_range_high = 240
additional_cooling_fan_speed = 0

4
print_config/prusa_slicer/materials/Soleyin_Ultra_PLA.ini
View File

@@ -4,6 +4,8 @@ material_type = pla
[settings]
idle_temperature = 150
first_layer_bed_temperature = 60
cool_plate_temp = 50
eng_plate_temp = 45
hot_plate_temp = 50
@@ -50,7 +52,7 @@ slow_down_layer_time = 12
filament_start_gcode = ;filament start gcode
nozzle_temperature = 220
temperature_vitrification = 60
filament_adhesiveness_category = 100
; filament_adhesiveness_category = 100
nozzle_temperature_range_low = 190
nozzle_temperature_range_high = 240
additional_cooling_fan_speed = 0

69
print_config/prusa_slicer/printers/Ender3_V3_SE.ini
View File

@@ -40,62 +40,55 @@ retract_layer_change = 1
retract_length = 0.8
retract_length_toolchange = 1
z_hop = 0.4
z_hop_types = Slope Lift
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
single_extruder_multi_material = 1
change_filament_gcode =
start_filament_gcode = ;Do nothing
wipe = 1
z_hop_types = Slope Lift
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n
default_print_profile = 0.20mm Standard @Creality Ender-3 V3 SE 0.4 nozzle
machine_start_gcode = M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \n \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800
machine_end_gcode = G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z
start_gcode = M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S{first_layer_bed_temperature[0]} ;Set final bed temp \nG28 ;Home \n \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S{idle_temperature[0]} ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S{first_layer_bed_temperature[0]} ;Wait for bed temp to stabilize \nM109 S{idle_temperature[0]} ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800
end_gcode = G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z
machine_max_acceleration_travel = 5000,5000
machine_pause_gcode = M25
bed_exclude_area = 0x0
layer_gcode =
scan_first_layer = 0
nozzle_type = brass
auxiliary_fan = 0
pause_print_gcode = M25
after_layer_gcode =
printer_model = Creality Ender-3 V3 SE
printer_structure = i3
bbl_use_printhost = 0
bed_mesh_max = 99999,99999
bed_mesh_min = -99999,-99999
bed_mesh_probe_distance = 50,50
best_object_pos = 0.5,0.5
; printer_structure = i3
; bed_mesh_max = 99999,99999
; bed_mesh_min = -99999,-99999
; bed_mesh_probe_distance = 50,50
; best_object_pos = 0.5,0.5
cooling_tube_length = 5
cooling_tube_retraction = 91.5
creality_flush_time = 86.0
disable_m73 = 0
emit_machine_limits_to_gcode = 1
enable_filament_ramming = 1
; disable_m73 = 0
machine_limits_usage = emit_to_gcode
; enable_filament_ramming = 1
extra_loading_move = -2
fan_kickstart = 0
fan_speedup_overhangs = 1
fan_speedup_time = 0
; fan_kickstart = 0
; fan_speedup_overhangs = 1
; fan_speedup_time = 0
high_current_on_filament_swap = 0
machine_LED_light_exist = 0
machine_load_filament_time = 11
machine_platform_motion_enable = 0
machine_unload_filament_time = 0
manual_filament_change = 1
nozzle_hrc = 0
nozzle_volume = 0
; machine_LED_light_exist = 0
filament_load_time = 11
; machine_platform_motion_enable = 0
filament_unload_time = 0
; manual_filament_change = 1
; nozzle_hrc = 0
; nozzle_volume = 0
parking_pos_retraction = 92
preferred_orientation = 0
printable_area = 0x0,220x0,220x220,0x220
purge_in_prime_tower = 1
support_multi_bed_types = 1
time_cost = 0
; preferred_orientation = 0
bed_shape = 0x0,220x0,220x220,0x220
; purge_in_prime_tower = 1
; support_multi_bed_types = 1
; time_cost = 0
use_firmware_retraction = 0
use_relative_e_distances = 1
z_offset = 0
retract_lift_above = 0
retract_lift_below = 0
retract_lift_enforce = All Surfaces
wipe_distance = 2
; retract_lift_enforce = All Surfaces
; wipe_distance = 2

42
print_config/prusa_slicer/supports/grid_support.ini
View File

@@ -4,28 +4,26 @@ show_name = Grid Support
[settings]
support_material = 1
support_line_width = 0.4
support_interface_filament = 0
support_on_build_plate_only = 0
support_material_auto = 1
support_material_extrusion_width = 0.4
support_material_interface_extruder = 0
support_top_z_distance = 0.2
support_interface_loop_pattern = 0
support_interface_top_layers = 2
support_interface_spacing = 0.5
support_interface_speed = 100%
support_base_pattern = rectilinear
support_base_pattern_spacing = 2.5
support_speed = 50
support_threshold_angle = 30
support_object_xy_distance = 0.35
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 50
support_material_threshold = 30
support_material_xy_spacing = 0.35
support_type = normal(auto)
support_material_style = Grid
support_interface_bottom_layers = 2
tree_support_branch_angle = 45
tree_support_wall_count = 0
; support_type = normal(auto)
support_material_style = grid
support_material_bottom_interface_layers = 2
support_angle = 0
support_material_angle = 0
support_bottom_interface_spacing = 0.5
support_bottom_z_distance = 0.2
support_critical_regions_only = 0
@@ -34,17 +32,3 @@ support_interface_not_for_body = 1
support_interface_pattern = auto
support_remove_small_overhang = 1
support_xy_overrides_z = xy_overrides_z
tree_support_adaptive_layer_height = 1
tree_support_angle_slow = 25
tree_support_auto_brim = 1
tree_support_branch_angle_organic = 40
tree_support_branch_diameter = 2
tree_support_branch_diameter_angle = 5
tree_support_branch_diameter_double_wall = 3
tree_support_branch_diameter_organic = 2
tree_support_branch_distance = 5
tree_support_branch_distance_organic = 1
tree_support_brim_width = 3
tree_support_tip_diameter = 0.8
tree_support_top_rate = 30%

44
print_config/prusa_slicer/supports/snug_support.ini
View File

@@ -3,29 +3,27 @@ show_name = Snug Support
[settings]
enable_support = 1
support_line_width = 0.4
support_interface_filament = 0
support_on_build_plate_only = 0
support_material = 1
support_material_auto = 1
support_material_extrusion_width = 0.4
support_material_interface_extruder = 0
support_top_z_distance = 0.2
support_interface_loop_pattern = 0
support_interface_top_layers = 2
support_interface_spacing = 0.5
support_interface_speed = 100%
support_base_pattern = rectilinear
support_base_pattern_spacing = 2.5
support_speed = 50
support_threshold_angle = 30
support_object_xy_distance = 0.35
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 50
support_material_threshold = 30
support_material_xy_spacing = 0.35
support_type = normal(auto)
support_style = Snug
support_interface_bottom_layers = 2
tree_support_branch_angle = 45
tree_support_wall_count = 0
; support_type = normal(auto)
support_material_style = snug
support_material_bottom_interface_layers = 2
support_angle = 0
support_material_angle = 0
support_bottom_interface_spacing = 0.5
support_bottom_z_distance = 0.2
support_critical_regions_only = 0
@@ -34,17 +32,3 @@ support_interface_not_for_body = 1
support_interface_pattern = auto
support_remove_small_overhang = 1
support_xy_overrides_z = xy_overrides_z
tree_support_adaptive_layer_height = 1
tree_support_angle_slow = 25
tree_support_auto_brim = 1
tree_support_branch_angle_organic = 40
tree_support_branch_diameter = 2
tree_support_branch_diameter_angle = 5
tree_support_branch_diameter_double_wall = 3
tree_support_branch_diameter_organic = 2
tree_support_branch_distance = 5
tree_support_branch_distance_organic = 1
tree_support_brim_width = 3
tree_support_tip_diameter = 0.8
tree_support_top_rate = 30%

59
print_config/prusa_slicer/supports/tree_support.ini
View File

@@ -3,29 +3,27 @@ show_name = Tree Support
[settings]
enable_support = 1
support_line_width = 0.4
support_interface_filament = 0
support_on_build_plate_only = 0
support_material = 1
support_material_auto = 1
support_material_extrusion_width = 0.4
support_material_interface_extruder = 0
support_top_z_distance = 0.2
support_interface_loop_pattern = 0
support_interface_top_layers = 2
support_interface_spacing = 0.5
support_interface_speed = 100%
support_base_pattern = rectilinear
support_base_pattern_spacing = 2.5
support_speed = 50
support_threshold_angle = 30
support_object_xy_distance = 0.35
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 50
support_material_threshold = 30
support_material_xy_spacing = 0.35
support_type = normal(auto)
support_style = Organic
support_interface_bottom_layers = 2
tree_support_branch_angle = 45
tree_support_wall_count = 0
; support_type = normal(auto)
support_material_style = organic
support_material_bottom_interface_layers = 2
support_angle = 0
support_material_angle = 0
support_bottom_interface_spacing = 0.5
support_bottom_z_distance = 0.2
support_critical_regions_only = 0
@@ -35,16 +33,19 @@ support_interface_pattern = auto
support_remove_small_overhang = 1
support_xy_overrides_z = xy_overrides_z
tree_support_adaptive_layer_height = 1
tree_support_angle_slow = 25
tree_support_auto_brim = 1
tree_support_branch_angle_organic = 40
tree_support_branch_diameter = 2
tree_support_branch_diameter_angle = 5
tree_support_branch_diameter_double_wall = 3
tree_support_branch_diameter_organic = 2
tree_support_branch_distance = 5
tree_support_branch_distance_organic = 1
tree_support_brim_width = 3
tree_support_tip_diameter = 0.8
tree_support_top_rate = 30%
support_tree_angle = 45
; tree_support_wall_count = 0
; tree_support_adaptive_layer_height = 1
support_tree_angle_slow = 25
; tree_support_auto_brim = 1
; tree_support_branch_angle_organic = 40
support_tree_branch_diameter = 2
support_tree_branch_diameter_angle = 5
support_tree_branch_diameter_double_wall = 3
; tree_support_branch_diameter_organic = 2
support_tree_branch_distance = 5
; tree_support_branch_distance_organic = 1
; tree_support_brim_width = 3
support_tree_tip_diameter = 0.8
support_tree_top_rate = 30%