能用prusa切片和预览了，添加了缺失的翻译

Co-authored-by: Copilot <copilot@github.com>

print_config/prusa_slicer/supports/grid_support.ini

@@ -0,0 +1,50 @@
+[metadata]
+show_name = Grid Support
+
+
+[settings]
+enable_support = 1
+support_filament = 0
+support_line_width = 0.4
+support_interface_filament = 0
+support_on_build_plate_only = 0
+support_top_z_distance = 0.2
+support_interface_loop_pattern = 0
+support_interface_top_layers = 2
+support_interface_spacing = 0.5
+support_interface_speed = 100%
+support_base_pattern = rectilinear
+support_base_pattern_spacing = 2.5
+support_speed = 50
+support_threshold_angle = 30
+support_object_xy_distance = 0.35
+
+support_type = normal(auto)
+support_style = Grid
+support_interface_bottom_layers = 2
+tree_support_branch_angle = 45
+tree_support_wall_count = 0
+
+support_angle = 0
+support_bottom_interface_spacing = 0.5
+support_bottom_z_distance = 0.2
+support_critical_regions_only = 0
+support_expansion = 0
+support_interface_not_for_body = 1
+support_interface_pattern = auto
+support_remove_small_overhang = 1
+support_xy_overrides_z = xy_overrides_z
+
+tree_support_adaptive_layer_height = 1
+tree_support_angle_slow = 25
+tree_support_auto_brim = 1
+tree_support_branch_angle_organic = 40
+tree_support_branch_diameter = 2
+tree_support_branch_diameter_angle = 5
+tree_support_branch_diameter_double_wall = 3
+tree_support_branch_diameter_organic = 2
+tree_support_branch_distance = 5
+tree_support_branch_distance_organic = 1
+tree_support_brim_width = 3
+tree_support_tip_diameter = 0.8
+tree_support_top_rate = 30%

print_config/prusa_slicer/supports/snug_support.ini

@@ -0,0 +1,50 @@
+[metadata]
+show_name = Snug Support
+
+
+[settings]
+enable_support = 1
+support_filament = 0
+support_line_width = 0.4
+support_interface_filament = 0
+support_on_build_plate_only = 0
+support_top_z_distance = 0.2
+support_interface_loop_pattern = 0
+support_interface_top_layers = 2
+support_interface_spacing = 0.5
+support_interface_speed = 100%
+support_base_pattern = rectilinear
+support_base_pattern_spacing = 2.5
+support_speed = 50
+support_threshold_angle = 30
+support_object_xy_distance = 0.35
+
+support_type = normal(auto)
+support_style = Snug
+support_interface_bottom_layers = 2
+tree_support_branch_angle = 45
+tree_support_wall_count = 0
+
+support_angle = 0
+support_bottom_interface_spacing = 0.5
+support_bottom_z_distance = 0.2
+support_critical_regions_only = 0
+support_expansion = 0
+support_interface_not_for_body = 1
+support_interface_pattern = auto
+support_remove_small_overhang = 1
+support_xy_overrides_z = xy_overrides_z
+
+tree_support_adaptive_layer_height = 1
+tree_support_angle_slow = 25
+tree_support_auto_brim = 1
+tree_support_branch_angle_organic = 40
+tree_support_branch_diameter = 2
+tree_support_branch_diameter_angle = 5
+tree_support_branch_diameter_double_wall = 3
+tree_support_branch_diameter_organic = 2
+tree_support_branch_distance = 5
+tree_support_branch_distance_organic = 1
+tree_support_brim_width = 3
+tree_support_tip_diameter = 0.8
+tree_support_top_rate = 30%

print_config/prusa_slicer/supports/tree_support.ini

@@ -0,0 +1,50 @@
+[metadata]
+show_name = Tree Support
+
+
+[settings]
+enable_support = 1
+support_filament = 0
+support_line_width = 0.4
+support_interface_filament = 0
+support_on_build_plate_only = 0
+support_top_z_distance = 0.2
+support_interface_loop_pattern = 0
+support_interface_top_layers = 2
+support_interface_spacing = 0.5
+support_interface_speed = 100%
+support_base_pattern = rectilinear
+support_base_pattern_spacing = 2.5
+support_speed = 50
+support_threshold_angle = 30
+support_object_xy_distance = 0.35
+
+support_type = normal(auto)
+support_style = Organic
+support_interface_bottom_layers = 2
+tree_support_branch_angle = 45
+tree_support_wall_count = 0
+
+support_angle = 0
+support_bottom_interface_spacing = 0.5
+support_bottom_z_distance = 0.2
+support_critical_regions_only = 0
+support_expansion = 0
+support_interface_not_for_body = 1
+support_interface_pattern = auto
+support_remove_small_overhang = 1
+support_xy_overrides_z = xy_overrides_z
+
+tree_support_adaptive_layer_height = 1
+tree_support_angle_slow = 25
+tree_support_auto_brim = 1
+tree_support_branch_angle_organic = 40
+tree_support_branch_diameter = 2
+tree_support_branch_diameter_angle = 5
+tree_support_branch_diameter_double_wall = 3
+tree_support_branch_diameter_organic = 2
+tree_support_branch_distance = 5
+tree_support_branch_distance_organic = 1
+tree_support_brim_width = 3
+tree_support_tip_diameter = 0.8
+tree_support_top_rate = 30%