tmp prusa配置文件集

Co-authored-by: Copilot <copilot@github.com>

app/assets/i18n/de.json

@@ -109,7 +109,7 @@
     "Admin": "Admin",
     "User": "Benutzer",
     "WARNING: Are you sure you want to permanently delete this user AND ALL their uploaded files and G-codes?": "WARNUNG: Sind Sie sicher, dass Sie diesen Benutzer UND ALLE seine Dateien löschen wollen?",
-    "CuraEngine Configurations": "CuraEngine-Konfigurationen",
+    "SliceEngine Configurations": "Slicing-Engine-Konfigurationen",
     "Plater Origin Offset X (mm)": "Druckbett Ursprung Offset X (mm)",
     "Adjust the X-axis compilation offset for combined files on the build plate.": "X-Achsen-Offset für kombinierte Dateien anpassen.",
     "Plater Origin Offset Y (mm)": "Druckbett Ursprung Offset Y (mm)",

app/assets/i18n/en.json

@@ -103,7 +103,7 @@
     "Admin": "Admin",
     "User": "User",
     "WARNING: Are you sure you want to permanently delete this user AND ALL their uploaded files and G-codes?": "WARNING: Are you sure you want to permanently delete this user AND ALL their uploaded files and G-codes?",
-    "CuraEngine Configurations": "CuraEngine Configurations",
+    "SliceEngine Configurations": "SliceEngine Configurations",
     "Plater Origin Offset X (mm)": "Plater Origin Offset X (mm)",
     "Adjust the X-axis compilation offset for combined files on the build plate.": "Adjust the X-axis compilation offset for combined files on the build plate.",
     "Plater Origin Offset Y (mm)": "Plater Origin Offset Y (mm)",

app/assets/i18n/zh-cn.json

@@ -109,7 +109,7 @@
     "Admin": "管理员",
     "User": "普通用户",
     "WARNING: Are you sure you want to permanently delete this user AND ALL their uploaded files and G-codes?": "警告：确定要永久删除该用户以及TA上传的所有文件和切片吗？",
-    "CuraEngine Configurations": "CuraEngine 配置",
+    "SliceEngine Configurations": "切片引擎配置",
     "Plater Origin Offset X (mm)": "构建板原点偏移 X (mm)",
     "Adjust the X-axis compilation offset for combined files on the build plate.": "调整多文件在构建板合并切片时的X坐标偏移。",
     "Plater Origin Offset Y (mm)": "构建板原点偏移 Y (mm)",

app/routes/admin_routes.py

@@ -13,6 +13,7 @@ from app.utils.tasks import merge_and_slice_task, slice_stl_task, simplify_stl_t
 from app import i18n_dict
 # import trimesh.repair
 from app.utils.stl_simplifier import simplify_stl
+from app.utils.slice_engines import get_all_engines
 
 
 main_bp = Blueprint('main', __name__)
@@ -46,6 +47,8 @@ def settings():
         default_support_pattern = request.form.get('default_support_pattern', 'tree')
         default_quality = request.form.get('default_quality', 'base_global_standard.inst.cfg')
         gcode_upload_folder = request.form.get('gcode_upload_folder', '').strip()
+        slicer_engine = request.form.get('slicer_engine', 'cura')
+        build_plate_model_path = request.form.get('build_plate_model_path', '').strip()
         
         # update or create config entries
         config_items = [
@@ -57,6 +60,8 @@ def settings():
             ('default_support_pattern', default_support_pattern),
             ('default_quality', default_quality),
             ('gcode_upload_folder', gcode_upload_folder),
+            ('slicer_engine', slicer_engine),
+            ('build_plate_model_path', build_plate_model_path),
             ('default_guest_stl_quota_mb', request.form.get('default_guest_stl_quota_mb', '0')),
             ('default_guest_gcode_quota_mb', request.form.get('default_guest_gcode_quota_mb', '0')),
             ('default_user_stl_quota_mb', request.form.get('default_user_stl_quota_mb', '0')),
@@ -75,8 +80,8 @@ def settings():
         return redirect(url_for('admin.settings'))
         
     configs = {c.key: c.value for c in SystemConfig.query.all()}
-    presets = get_quality_presets()
+    engines = get_all_engines()
-    return render_template('admin/settings.html', configs=configs, presets=presets)
+    return render_template('admin/settings.html', configs=configs, engines=engines)
 
 @admin_bp.route('/users')
 def users():
@@ -192,18 +197,3 @@ def get_bed_dimensions():
     except:
         return 200, 200, 200
 
-def get_quality_presets():
-    try:
-
-        path = os.path.join(current_app.root_path, '..', 'print_config', 'quality', 'creality', 'presets')
-        files = [f for f in os.listdir(path) if f.endswith('.inst.cfg')]
-        presets = []
-        for f in files:
-            # name = f.replace('.inst.cfg', '').replace('base_', '').replace('_', ' ')
-            name = f.replace('.inst.cfg', '')
-            presets.append((f, name))
-        presets.sort(key=lambda x: x[1])
-        return presets
-    except:
-        return []
-

app/routes/main_routes.py

@@ -338,21 +338,6 @@ def get_bed_dimensions():
     except:
         return 200, 200, 200
 
-def get_quality_presets():
-    try:
-
-        path = os.path.join(current_app.root_path, '..', 'print_config', 'quality', 'creality', 'presets')
-        files = [f for f in os.listdir(path) if f.endswith('.inst.cfg')]
-        presets = []
-        for f in files:
-            # name = f.replace('.inst.cfg', '').replace('base_', '').replace('_', ' ')
-            name = f.replace('.inst.cfg', '')
-            presets.append((f, name))
-        presets.sort(key=lambda x: x[1])
-        return presets
-    except:
-        return []
-
 @main_bp.route('/plater')
 @login_required
 def plater():
@@ -360,7 +345,7 @@ def plater():
     quota_exceeded = (quota_mb > 0 and current_size >= quota_mb * 1024 * 1024)
         
     w, h, hd = get_bed_dimensions()
-    presets = get_quality_presets()
+    
     
     configs = {c.key: c.value for c in SystemConfig.query.all()}
     offset_x = float(configs.get('offset_x', '0.0'))
@@ -373,7 +358,7 @@ def plater():
     
     user_files = PrintFile.query.filter_by(user_id=current_user.id, file_type='stl').order_by(PrintFile.created_at.desc()).all()
     models = [{'id': f.id, 'name': f.original_filename, 'status': f.status, 'url': url_for('main.serve_proxy_file', file_id=f.id), 'transform_matrix': f.transform_matrix} for f in user_files]
-    return render_template('slice/plater.html', w=w, h=h, hd=hd, presets=presets, last_quality=default_quality, models=models, offset_x=offset_x, offset_y=offset_y, default_infill=default_infill, default_support=default_support, default_support_pattern=default_support_pattern, quota_exceeded=quota_exceeded)
+    return render_template('slice/plater.html', w=w, h=h, hd=hd, last_quality=default_quality, models=models, offset_x=offset_x, offset_y=offset_y, default_infill=default_infill, default_support=default_support, default_support_pattern=default_support_pattern, quota_exceeded=quota_exceeded, configs=configs)
 
 @main_bp.route('/file/<int:file_id>')
 @login_required
@@ -553,3 +538,20 @@ def merge_and_slice():
 
     return jsonify({'success': True, 'message': 'Plater slice queued!'})
 
+
+@main_bp.route('/api/build_plate_model')
+@login_required
+def build_plate_model():
+    conf = SystemConfig.query.filter_by(key='build_plate_model_path').first()
+    if conf and conf.value and os.path.exists(conf.value):
+        return send_file(conf.value)
+    abort(404)
+
+@main_bp.route('/api/engine_options/<engine_name>')
+@login_required
+def engine_options(engine_name):
+    from app.utils.slice_engines import get_slicer_engine
+    engine = get_slicer_engine(engine_name)
+    presets = engine.get_quality_presets(current_app)
+    patterns = engine.get_support_patterns()
+    return jsonify({'presets': presets, 'support_patterns': patterns})

app/templates/admin/settings.html

@@ -7,8 +7,7 @@
 
 <div class="card shadow-sm">
     <div class="card-body">
-        <h5>{{ _('CuraEngine Configurations') }}</h5>
+        <h5 class="card-title text-primary border-bottom pb-2 mt-4 mb-3">{{ _('SliceEngine Configurations') }}</h5>
-        <hr>
         <form id="settingsForm" onsubmit="submitSettings(event)">
             <div class="mb-3">
                 <label for="offset_x" class="form-label">{{ _('Plater Origin Offset X (mm)') }}</label>
@@ -34,8 +33,13 @@
                 <div class="form-text">{{ _('Absolute path to save locally sliced GCode files (e.g. OctoPrint uploads folder like "/home/pi/.octoprint/uploads"). Leave empty to use system default.') }}</div>
             </div>
 
-            <h5 class="mt-4">{{ _('Default Plater Settings') }}</h5>
+            <h5 class="card-title text-primary border-bottom pb-2 mt-4 mb-3"><i class="bi bi-grid-3x3 me-2"></i>{{ _('Default Plater Settings') }}</h5>
-            <hr>
+
+            <div class="mb-3">
+                <label for="build_plate_model_path" class="form-label">{{ _('Build Plate Model Path (.stl)') }}</label>
+                <input type="text" class="form-control" name="build_plate_model_path" id="build_plate_model_path" value="{{ configs.get('build_plate_model_path', '') }}">
+                <div class="form-text">{{ _('Absolute path to a custom build plate STL model to show in the plater. Leave empty to use none.') }}</div>
+            </div>
             
             <div class="mb-3">
                 <label for="default_infill" class="form-label">{{ _('Default Infill Density (%)') }}</label>
@@ -53,29 +57,32 @@
 
             <div class="mb-3">
                 <label for="default_support_pattern" class="form-label">{{ _('Default Support Type') }}</label>
-                <select class="form-select" name="default_support_pattern" id="default_support_pattern">
+                <select class="form-select" name="default_support_pattern" id="default_support_pattern" data-selected="{{ configs.get('default_support_pattern', 'tree') }}">
-                    <option value="tree" {% if configs.get('default_support_pattern', 'tree') == 'tree' %}selected{% endif %}>{{ _('Tree') }}</option>
+                    <!-- Loaded via JS -->
-                    <option value="lines" {% if configs.get('default_support_pattern', 'tree') == 'lines' %}selected{% endif %}>{{ _('Lines') }}</option>
-                    <option value="grid" {% if configs.get('default_support_pattern', 'tree') == 'grid' %}selected{% endif %}>{{ _('Grid') }}</option>
-                    <option value="triangles" {% if configs.get('default_support_pattern', 'tree') == 'triangles' %}selected{% endif %}>{{ _('Triangles') }}</option>
-                    <option value="concentric" {% if configs.get('default_support_pattern', 'tree') == 'concentric' %}selected{% endif %}>{{ _('Concentric') }}</option>
-                    <option value="zigzag" {% if configs.get('default_support_pattern', 'tree') == 'zigzag' %}selected{% endif %}>{{ _('Zig Zag') }}</option>
-                    <option value="cross" {% if configs.get('default_support_pattern', 'tree') == 'cross' %}selected{% endif %}>{{ _('Cross') }}</option>
-                    <option value="gyroid" {% if configs.get('default_support_pattern', 'tree') == 'gyroid' %}selected{% endif %}>{{ _('Gyroid') }}</option>
-                    <option value="honeycomb" {% if configs.get('default_support_pattern', 'tree') == 'honeycomb' %}selected{% endif %}>{{ _('Honeycomb') }}</option>
-                    <option value="octagon" {% if configs.get('default_support_pattern', 'tree') == 'octagon' %}selected{% endif %}>{{ _('Octagon') }}</option>
                 </select>
             </div>
 
             <div class="mb-4">
                 <label for="default_quality" class="form-label">{{ _('Default Quality Profile') }}</label>
-                <select class="form-select" name="default_quality" id="default_quality">
+                <select class="form-select" name="default_quality" id="default_quality" data-selected="{{ configs.get('default_quality', 'base_global_standard.inst.cfg') }}">
-                    {% for key, name in presets %}
+                    <!-- Loaded via JS -->
-                    <option value="{{ key }}" {% if configs.get('default_quality', 'base_global_standard.inst.cfg') == key %}selected{% endif %}>{{ _(name) }}</option>
-                    {% endfor %}
                 </select>
             </div>
 
+            <h5 class="card-title text-primary border-bottom pb-2 mt-4 mb-3"><i class="bi bi-cpu me-2"></i>{{ _('Slicing Engine Configurations') }}</h5>
+            <div class="mb-3">
+                <label for="slicer_engine" class="form-label">{{ _('Slicing Engine') }}</label>
+                <select class="form-select" name="slicer_engine" id="slicer_engine">
+                    {% for engine in engines %}
+                    <option value="{{ engine.name }}" {% if configs.get('slicer_engine', 'cura') == engine.name %}selected{% endif %} {% if not engine.is_available %}disabled{% endif %}>
+                        {{ engine.display_name }} {% if not engine.is_available %}({{ _('Not Available') }}){% endif %}
+                    </option>
+                    {% endfor %}
+                </select>
+                <div class="form-text mt-2"><i class="bi bi-info-circle me-1"></i>{{ _('Select the engine to be used globally. Ensure the selected engine is installed and accessible on the server.') }}</div>
+            </div>
+
+
             <h5 class="card-title text-primary border-bottom pb-2 mt-4 mb-3"><i class="bi bi-hdd-network me-2"></i>{{ _('Default Storage Quotas (MB)') }}</h5>
             
             <div class="row">
@@ -140,5 +147,42 @@ function submitSettings(event) {
         btn.innerHTML = originalText;
     });
 }
+
+document.addEventListener('DOMContentLoaded', function() {
+    const engineSelect = document.getElementById('slicer_engine');
+    const qualitySelect = document.getElementById('default_quality');
+    const patternSelect = document.getElementById('default_support_pattern');
+
+    function updateOptions(engine) {
+        fetch(`/api/engine_options/${engine}`)
+            .then(res => res.json())
+            .then(data => {
+                const selQ = qualitySelect.getAttribute('data-selected');
+                qualitySelect.innerHTML = '';
+                data.presets.forEach(p => {
+                    const opt = document.createElement('option');
+                    opt.value = p.id; opt.textContent = p.name;
+                    qualitySelect.appendChild(opt);
+                });
+                if(selQ) qualitySelect.value = selQ;
+                
+                const selP = patternSelect.getAttribute('data-selected');
+                patternSelect.innerHTML = '';
+                data.support_patterns.forEach(p => {
+                    const opt = document.createElement('option');
+                    opt.value = p.id; opt.textContent = p.name;
+                    patternSelect.appendChild(opt);
+                });
+                if(selP) patternSelect.value = selP;
+            });
+    }
+
+    engineSelect.addEventListener('change', function() {
+        updateOptions(this.value);
+    });
+
+    // Initial load
+    updateOptions(engineSelect.value);
+});
 </script>
 {% endblock %}

app/templates/slice/plater.html

@@ -95,18 +95,7 @@
                     </div>
                     <div class="mb-2">
                         <label for="support-pattern" class="form-label text-secondary small mb-1">{{ _('Support Type') }}</label>
-                        <select class="form-select form-select-sm" id="support-pattern" {% if default_support == 'false' %}disabled{% endif %}>
+                        <select class="form-select form-select-sm" id="support-pattern" data-selected="{{ default_support_pattern }}" {% if default_support == 'false' %}disabled{% endif %}></select>
-                            <option value="tree" {% if default_support_pattern == 'tree' %}selected{% endif %}>{{ _('Tree') }}</option>
-                            <option value="lines" {% if default_support_pattern == 'lines' %}selected{% endif %}>{{ _('Lines') }}</option>
-                            <option value="grid" {% if default_support_pattern == 'grid' %}selected{% endif %}>{{ _('Grid') }}</option>
-                            <option value="triangles" {% if default_support_pattern == 'triangles' %}selected{% endif %}>{{ _('Triangles') }}</option>
-                            <option value="concentric" {% if default_support_pattern == 'concentric' %}selected{% endif %}>{{ _('Concentric') }}</option>
-                            <option value="zigzag" {% if default_support_pattern == 'zigzag' %}selected{% endif %}>{{ _('Zig Zag') }}</option>
-                            <option value="cross" {% if default_support_pattern == 'cross' %}selected{% endif %}>{{ _('Cross') }}</option>
-                            <option value="gyroid" {% if default_support_pattern == 'gyroid' %}selected{% endif %}>{{ _('Gyroid') }}</option>
-                            <option value="honeycomb" {% if default_support_pattern == 'honeycomb' %}selected{% endif %}>{{ _('Honeycomb') }}</option>
-                            <option value="octagon" {% if default_support_pattern == 'octagon' %}selected{% endif %}>{{ _('Octagon') }}</option>
-                        </select>
                     </div>
                 </div>
             </div>
@@ -120,11 +109,7 @@
             <div id="collapseQuality" class="collapse" data-bs-parent="#platerSidebarAccordion">
                 <div class="card-body">
                     <div class="mb-3">
-                        <select class="form-select bg-light" id="quality">
+                        <select class="form-select bg-light" id="quality" data-selected="{{ last_quality }}"></select>
-                            {% for key, name in presets %}
-                            <option value="{{ key }}" {% if key == last_quality %}selected{% endif %}>{{ _(name) }}</option>
-                            {% endfor %}
-                        </select>
                     </div>
                 </div>
             </div>
@@ -226,6 +211,18 @@ function initPlater() {
     axesHelper.position.set(-bedWidth / 2, -bedDepth / 2, 0.2);
     scene.add(axesHelper);
 
+    {% if configs.get('build_plate_model_path') %}
+    const bpLoader = new THREE.STLLoader();
+    bpLoader.load("{{ url_for('main.build_plate_model') }}", function (geometry) {
+        const material = new THREE.MeshPhongMaterial({ color: 0x999999, specular: 0x111111, shininess: 200 });
+        const mesh = new THREE.Mesh(geometry, material);
+        <!-- mesh.rotation.set(-Math.PI / 2, 0, 0); -->
+        mesh.rotation.set(0, 0, 0);
+        mesh.position.set(0, 0, -0.1); // Slightly below the grid
+        scene.add(mesh);
+    });
+    {% endif %}
+
     // Show Bed Box outline
     const boxGeo = new THREE.BoxGeometry(bedWidth, bedDepth, bedHeight);
     const edges = new THREE.EdgesGeometry(boxGeo);
@@ -671,8 +668,17 @@ function addModelToPlate(btnElement, fileId, url, name, status) {
                     supportSelect.value = data.settings.support;
                     supportSelect.dispatchEvent(new Event('change'));
                 }
-                if (data.settings.support_pattern) document.getElementById('support-pattern').value = data.settings.support_pattern;
+                
-                if (data.settings.quality) document.getElementById('quality').value = data.settings.quality;
+                if (data.settings.support_pattern) {
+                    const sSelect = document.getElementById('support-pattern');
+                    sSelect.setAttribute('data-selected', data.settings.support_pattern);
+                    sSelect.value = data.settings.support_pattern;
+                }
+                if (data.settings.quality) {
+                    const qSelect = document.getElementById('quality');
+                    qSelect.setAttribute('data-selected', data.settings.quality);
+                    qSelect.value = data.settings.quality;
+                }
             }
         } catch (e) {}
     }
@@ -948,4 +954,33 @@ document.addEventListener('DOMContentLoaded', () => {
     }
 });
 </script>
+<script>
+    document.addEventListener('DOMContentLoaded', function() {
+        const engine = "{{ configs.get('slicer_engine', 'cura') }}";
+        const qualitySelect = document.getElementById('quality');
+        const patternSelect = document.getElementById('support-pattern');
+
+        fetch(`/api/engine_options/${engine}`)
+            .then(res => res.json())
+            .then(data => {
+                const selQ = qualitySelect.getAttribute('data-selected');
+                qualitySelect.innerHTML = '';
+                data.presets.forEach(p => {
+                    const opt = document.createElement('option');
+                    opt.value = p.id; opt.textContent = p.name;
+                    qualitySelect.appendChild(opt);
+                });
+                if(selQ) qualitySelect.value = selQ;
+                
+                const selP = patternSelect.getAttribute('data-selected');
+                patternSelect.innerHTML = '';
+                data.support_patterns.forEach(p => {
+                    const opt = document.createElement('option');
+                    opt.value = p.id; opt.textContent = p.name;
+                    patternSelect.appendChild(opt);
+                });
+                if(selP) patternSelect.value = selP;
+            });
+    });
+</script>
 {% endblock %}

app/utils/slice_engines/__init__.py

@@ -1,6 +1,13 @@
 from .cura_engine import CuraEngine
 from .prusa_slicer_engine import PrusaSlicerEngine
 
+def get_all_engines():
+    """Returns a list of instantiated engines."""
+    return [
+        CuraEngine(),
+        PrusaSlicerEngine()
+    ]
+
 def get_slicer_engine(engine_name="cura"):
     """
     Factory function to retrieve the requested slicing engine instance.
@@ -14,4 +21,4 @@ def get_slicer_engine(engine_name="cura"):
         return PrusaSlicerEngine()
     else:
         # Default fallback
-        return CuraEngine()
+        return CuraEngine()

app/utils/slice_engines/cura_engine.py

@@ -8,6 +8,26 @@ from app.utils.conf_parse import ConfParse
 class CuraEngine:
     def __init__(self):
         self.name = "cura"
+        self.display_name = "UltiMaker Cura"
+        self.is_available = self._check_available()
+        
+    def _check_available(self):
+        try:
+            # check if CuraEngine is available in PATH
+            result = subprocess.run(["CuraEngine", "help"], stdout=subprocess.PIPE, stderr=subprocess.PIPE)
+            return result.returncode == 0 or b"Usage:" in result.stdout or b"Usage:" in result.stderr
+        except (FileNotFoundError, OSError):
+            return False
+        self.display_name = "UltiMaker Cura"
+        self.is_available = self._check_available()
+        
+    def _check_available(self):
+        try:
+            # check if CuraEngine is available in PATH
+            result = subprocess.run(["CuraEngine", "help"], stdout=subprocess.PIPE, stderr=subprocess.PIPE)
+            return result.returncode == 0 or b"Usage:" in result.stdout or b"Usage:" in result.stderr
+        except (FileNotFoundError, OSError):
+            return False
 
     def slice(self, app, stl_filepath, gcode_filepath, **kwargs):
         """
@@ -165,4 +185,31 @@ class CuraEngine:
                 try:
                     os.remove(tmp_def_path)
                 except Exception as e:
-                    app.logger.error(f"Failed to delete temp JSON config {tmp_def_path}: {e}")
+                    app.logger.error(f"Failed to delete temp JSON config {tmp_def_path}: {e}")
+                    
+    def get_quality_presets(self, app):
+        try:
+            path = os.path.join(app.root_path, '..', 'print_config', 'cura_engine', 'quality', 'creality', 'presets')
+            if not os.path.exists(path): return []
+            files = [f for f in os.listdir(path) if f.endswith('.inst.cfg')]
+            presets = []
+            for f in files:
+                presets.append({'id': f, 'name': f.replace('.inst.cfg', '')})
+            presets.sort(key=lambda x: x['name'])
+            return presets
+        except:
+            return []
+
+    def get_support_patterns(self):
+        return [
+            {'id': 'tree', 'name': 'Tree'},
+            {'id': 'lines', 'name': 'Lines'},
+            {'id': 'grid', 'name': 'Grid'},
+            {'id': 'triangles', 'name': 'Triangles'},
+            {'id': 'concentric', 'name': 'Concentric'},
+            {'id': 'zigzag', 'name': 'Zig Zag'},
+            {'id': 'cross', 'name': 'Cross'},
+            {'id': 'gyroid', 'name': 'Gyroid'},
+            {'id': 'honeycomb', 'name': 'Honeycomb'},
+            {'id': 'octagon', 'name': 'Octagon'}
+        ]

app/utils/slice_engines/prusa_slicer_engine.py

@@ -1,9 +1,19 @@
 import os
 import subprocess
+import configparser
 
 class PrusaSlicerEngine:
     def __init__(self):
         self.name = "prusa_slicer"
+        self.display_name = "PrusaSlicer"
+        self.is_available = self._check_available()
+        
+    def _check_available(self):
+        try:
+            result = subprocess.run(["prusa-slicer", "--help"], stdout=subprocess.PIPE, stderr=subprocess.PIPE)
+            return b"Usage:" in result.stdout or b"Slic3r" in result.stdout or b"PrusaSlicer" in result.stdout or result.returncode == 0
+        except (FileNotFoundError, OSError):
+            return False
         
     def slice(self, app, stl_filepath, gcode_filepath, **kwargs):
         """
@@ -55,3 +65,25 @@ class PrusaSlicerEngine:
         except Exception as e:
             app.logger.error(f"PrusaSlicer Exception: {e}")
             return False, str(e)
+
+    def get_quality_presets(self, app):
+        all_files = [f for f in os.listdir(os.path.join(app.root_path, '..', 'print_config', 'prusa_slicer',"quality")) if f.endswith('.ini')]
+        quality_presets = []
+        for file in all_files:
+            with open(os.path.join(app.root_path, '..', 'print_config', 'prusa_slicer', "quality", file), 'r') as f:
+                config = configparser.ConfigParser()
+                config.read_file(f)
+                if 'metadata' in config:
+                    quality_presets.append({
+                        'id': file.replace('.ini', ''),
+                        'name': config['metadata'].get('show_name', file.replace('.ini', '').replace('_', ' '))
+                    })
+        return quality_presets
+
+    def get_support_patterns(self):
+        return [
+            {'id': 'rectilinear', 'name': 'Rectilinear'},
+            {'id': 'grid', 'name': 'Grid'},
+            {'id': 'organic', 'name': 'Organic (Tree)'},
+            {'id': 'snug', 'name': 'Snug'}
+        ]

patch_tasks.py

@@ -1,62 +0,0 @@
-with open('app/utils/tasks.py', 'r', encoding='utf-8') as f:
-    text = f.read()
-
-import re
-old_block = re.search(r'tmp_def_path = None.*?db\.session\.remove\(\)', text, re.DOTALL)
-
-new_block = """from app.utils.slice_engines import get_slicer_engine
-        
-        try:
-            # Optionally fetch the preferred engine from db conf or just default to cura
-            # For now default to cura or whichever is passed via kwargs if implemented later
-            conf_engine = SystemConfig.query.filter_by(key='slicer_engine').first()
-            engine_name = conf_engine.value if conf_engine and conf_engine.value else "cura"
-            db.session.remove()
-            
-            slicer = get_slicer_engine(engine_name)
-            
-            success, err_msg = slicer.slice(
-                app=app,
-                stl_filepath=stl_filepath,
-                gcode_filepath=gcode_filepath,
-                quality_preset=quality_preset,
-                infill_density=infill_density,
-                support_enable=support_enable,
-                support_pattern=support_pattern
-            )
-            
-            # Re-fetch print_file and update status
-            print_file = PrintFile.query.get(file_id)
-            if not print_file:
-                return
-
-            if success:
-                print_file.status = 'sliced'
-            else:
-                print_file.status = 'failed'
-                app.logger.error(f"Slicing Task Failed: {err_msg}")
-                
-        except Exception as e:
-            print_file = PrintFile.query.get(file_id)
-            if print_file:
-                print_file.status = 'failed'
-            app.logger.error(f"Subprocess Exception: {e}")
-            
-        finally:
-            if delete_stl and os.path.exists(stl_filepath):
-                try:
-                    os.remove(stl_filepath)
-                except Exception as e:
-                    app.logger.error(f"Failed to delete temp STL {stl_filepath}: {e}")
-                    
-            db.session.commit()
-            db.session.remove()"""
-
-if old_block:
-    res = text.replace(old_block.group(0), new_block)
-    with open('app/utils/tasks.py', 'w', encoding='utf-8') as f:
-        f.write(res)
-    print("Patched successfully")
-else:
-    print("Pattern not found!")
-

print_config/prusa_slicer/materials/CR-PETG.ini

@@ -0,0 +1,94 @@
+[metadata]
+show_name = CR-PETG
+material_type = petg
+
+
+[settings]
+filament_adhesiveness_category = 300
+cool_plate_temp = 70
+eng_plate_temp = 0
+hot_plate_temp = 70
+textured_plate_temp = 70
+cool_plate_temp_initial_layer = 70
+eng_plate_temp_initial_layer = 0
+hot_plate_temp_initial_layer = 70
+textured_plate_temp_initial_layer = 70
+overhang_fan_threshold = 25%
+overhang_fan_speed = 90
+slow_down_for_layer_cooling = 1
+close_fan_the_first_x_layers = 3
+filament_end_gcode = ; filament end gcode \n
+filament_flow_ratio = 0.95
+reduce_fan_stop_start_freq = 1
+fan_cooling_layer_time = 30
+filament_cost = 14
+filament_density = 1.23
+filament_deretraction_speed = nil
+filament_diameter = 1.75
+filament_max_volumetric_speed = 9
+filament_minimal_purge_on_wipe_tower = 15
+filament_retraction_minimum_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_when_changing_layer = nil
+filament_retraction_length = nil
+filament_z_hop = nil
+filament_z_hop_types = nil
+filament_retract_restart_extra = 0
+filament_retraction_speed = nil
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PETG
+filament_vendor = Creality
+filament_wipe = nil
+filament_wipe_distance = nil
+bed_type = Cool Plate
+nozzle_temperature_initial_layer = 230
+full_fan_speed_layer = 0
+fan_max_speed = 40
+fan_min_speed = 30
+slow_down_min_speed = 10
+slow_down_layer_time = 8
+filament_start_gcode = ; filament start gcode\n
+nozzle_temperature = 230
+temperature_vitrification = 80
+activate_air_filtration = 0
+activate_chamber_temp_control = 0
+additional_cooling_fan_speed = 0
+chamber_temperature = 35
+complete_print_exhaust_fan_speed = 80
+cool_cds_fan_start_at_height = 0
+cool_special_cds_fan_speed = 0
+default_filament_colour = ""
+during_print_exhaust_fan_speed = 60
+enable_overhang_bridge_fan = 1
+enable_pressure_advance = 1
+enable_special_area_additional_cooling_fan = 0
+epoxy_resin_plate_temp = 70
+epoxy_resin_plate_temp_initial_layer = 70
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_is_support = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_lift_above = 0
+filament_retract_lift_below = 0
+filament_retract_lift_enforce = All Surfaces
+filament_shrink = 100%
+filament_toolchange_delay = 0
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+material_flow_dependent_temperature = 0
+material_flow_temp_graph = [[3.0,210],  [10.0,220],  [12.0,230]]
+nozzle_temperature_range_high = 270
+nozzle_temperature_range_low = 220
+pressure_advance = 0.08
+required_nozzle_HRC = 0
+support_material_interface_fan_speed = -1

print_config/prusa_slicer/materials/CR-PLA.ini

@@ -0,0 +1,94 @@
+[metadata]
+show_name = CR-PLA
+material_type = pla
+
+
+[settings]
+cool_plate_temp = 50
+eng_plate_temp = 45
+hot_plate_temp = 50
+textured_plate_temp = 50
+cool_plate_temp_initial_layer = 50
+eng_plate_temp_initial_layer = 45
+hot_plate_temp_initial_layer = 50
+textured_plate_temp_initial_layer = 50
+overhang_fan_threshold = 50%
+overhang_fan_speed = 100
+slow_down_for_layer_cooling = 1
+close_fan_the_first_x_layers = 1
+filament_end_gcode = ;filament end gcode 
+filament_flow_ratio = 0.95
+reduce_fan_stop_start_freq = 1
+fan_cooling_layer_time = 100
+filament_cost = 25
+filament_density = 1.25
+filament_deretraction_speed = nil
+filament_diameter = 1.75
+filament_max_volumetric_speed = 12
+filament_minimal_purge_on_wipe_tower = 15
+filament_retraction_minimum_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_when_changing_layer = nil
+filament_retraction_length = 1
+filament_z_hop = 0.2
+filament_z_hop_types = Slope Lift
+filament_retract_restart_extra = 0
+filament_retraction_speed = 40
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PLA
+filament_vendor = Creality
+filament_wipe = nil
+filament_wipe_distance = nil
+bed_type = Cool Plate
+nozzle_temperature_initial_layer = 190
+full_fan_speed_layer = 0
+fan_max_speed = 100
+fan_min_speed = 100
+slow_down_min_speed = 20
+slow_down_layer_time = 6
+filament_start_gcode = ;filament start gcode
+nozzle_temperature = 190
+temperature_vitrification = 100
+filament_adhesiveness_category = 100
+nozzle_temperature_range_low = 190
+nozzle_temperature_range_high = 240
+additional_cooling_fan_speed = 0
+activate_air_filtration = 0
+activate_chamber_temp_control = 0
+chamber_temperature = 0
+complete_print_exhaust_fan_speed = 80
+cool_cds_fan_start_at_height = 0
+cool_special_cds_fan_speed = 0
+default_filament_colour = ""
+during_print_exhaust_fan_speed = 60
+enable_overhang_bridge_fan = 1
+enable_pressure_advance = 0
+enable_special_area_additional_cooling_fan = 0
+epoxy_resin_plate_temp = 0
+epoxy_resin_plate_temp_initial_layer = 0
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_is_support = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_lift_above = 0
+filament_retract_lift_below = 0
+filament_retract_lift_enforce = All Surfaces
+filament_shrink = 100%
+filament_toolchange_delay = 0
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+material_flow_dependent_temperature = 0
+material_flow_temp_graph = [[2.0,185],[4.0,190],[7.0,200]]
+pressure_advance = 0.02
+required_nozzle_HRC = 0
+support_material_interface_fan_speed = -1

print_config/prusa_slicer/materials/Generic_PETG.ini

@@ -0,0 +1,94 @@
+[metadata]
+show_name = Generic PETG
+material_type = petg
+
+
+[settings]
+filament_adhesiveness_category = 300
+cool_plate_temp = 60
+eng_plate_temp = 0
+hot_plate_temp = 70
+textured_plate_temp = 70
+cool_plate_temp_initial_layer = 60
+eng_plate_temp_initial_layer = 0
+hot_plate_temp_initial_layer = 70
+textured_plate_temp_initial_layer = 70
+overhang_fan_threshold = 25%
+overhang_fan_speed = 90
+slow_down_for_layer_cooling = 1
+close_fan_the_first_x_layers = 3
+filament_end_gcode = ;filament end gcode \n
+filament_flow_ratio = 0.95
+reduce_fan_stop_start_freq = 1
+fan_cooling_layer_time = 30
+filament_cost = 30
+filament_density = 1.27
+filament_deretraction_speed = nil
+filament_diameter = 1.75
+filament_max_volumetric_speed = 10
+filament_minimal_purge_on_wipe_tower = 15
+filament_retraction_minimum_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_when_changing_layer = nil
+filament_retraction_length = 1.2
+filament_z_hop = 0.2
+filament_z_hop_types = nil
+filament_retract_restart_extra = 0
+filament_retraction_speed = nil
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PETG
+filament_vendor = Creality
+filament_wipe = nil
+filament_wipe_distance = nil
+bed_type = Cool Plate
+nozzle_temperature_initial_layer = 220
+full_fan_speed_layer = 0
+fan_max_speed = 80
+fan_min_speed = 40
+slow_down_min_speed = 10
+slow_down_layer_time = 8
+filament_start_gcode = ;filament start gcode\n
+nozzle_temperature = 220
+temperature_vitrification = 80
+activate_air_filtration = 0
+activate_chamber_temp_control = 0
+additional_cooling_fan_speed = 0
+chamber_temperature = 0
+complete_print_exhaust_fan_speed = 80
+cool_cds_fan_start_at_height = 0
+cool_special_cds_fan_speed = 0
+default_filament_colour = ""
+during_print_exhaust_fan_speed = 60
+enable_overhang_bridge_fan = 1
+enable_pressure_advance = 0
+enable_special_area_additional_cooling_fan = 0
+epoxy_resin_plate_temp = 0
+epoxy_resin_plate_temp_initial_layer = 0
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_is_support = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_lift_above = 0
+filament_retract_lift_below = 0
+filament_retract_lift_enforce = All Surfaces
+filament_shrink = 100%
+filament_toolchange_delay = 0
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+material_flow_dependent_temperature = 0
+material_flow_temp_graph = [[3.5,200],[7.0,240]]
+nozzle_temperature_range_high = 270
+nozzle_temperature_range_low = 220
+pressure_advance = 0.02
+required_nozzle_HRC = 0
+support_material_interface_fan_speed = -1

print_config/prusa_slicer/materials/Generic_TPU.ini

@@ -0,0 +1,94 @@
+[metadata]
+show_name = Generic TPU
+material_type = tpu
+
+
+[settings]
+cool_plate_temp = 30
+eng_plate_temp = 30
+hot_plate_temp = 30
+textured_plate_temp = 30
+cool_plate_temp_initial_layer = 30
+eng_plate_temp_initial_layer = 30
+hot_plate_temp_initial_layer = 30
+textured_plate_temp_initial_layer = 30
+overhang_fan_threshold = 95%
+overhang_fan_speed = 100
+slow_down_for_layer_cooling = 1
+close_fan_the_first_x_layers = 1
+filament_end_gcode = ;filament end gcode \n
+filament_flow_ratio = 1
+reduce_fan_stop_start_freq = 1
+fan_cooling_layer_time = 100
+filament_cost = 20
+filament_density = 1.24
+filament_deretraction_speed = nil
+filament_diameter = 1.75
+filament_max_volumetric_speed = 3
+filament_minimal_purge_on_wipe_tower = 15
+filament_retraction_minimum_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_when_changing_layer = nil
+filament_retraction_length = 2
+filament_z_hop = 0.2
+filament_z_hop_types = nil
+filament_retract_restart_extra = 0
+filament_retraction_speed = nil
+filament_settings_id = 
+filament_soluble = 0
+filament_type = TPU
+filament_vendor = Generic
+filament_wipe = nil
+filament_wipe_distance = nil
+bed_type = Cool Plate
+nozzle_temperature_initial_layer = 200
+full_fan_speed_layer = 0
+fan_max_speed = 100
+fan_min_speed = 100
+slow_down_min_speed = 10
+slow_down_layer_time = 12
+filament_start_gcode = ;filament start gcode\n
+nozzle_temperature = 200
+temperature_vitrification = 60
+filament_adhesiveness_category = 600
+additional_cooling_fan_speed = 0
+nozzle_temperature_range_low = 200
+nozzle_temperature_range_high = 250
+activate_air_filtration = 0
+activate_chamber_temp_control = 0
+chamber_temperature = 0
+complete_print_exhaust_fan_speed = 80
+cool_cds_fan_start_at_height = 0
+cool_special_cds_fan_speed = 0
+default_filament_colour = ""
+during_print_exhaust_fan_speed = 60
+enable_overhang_bridge_fan = 1
+enable_pressure_advance = 0
+enable_special_area_additional_cooling_fan = 0
+epoxy_resin_plate_temp = 0
+epoxy_resin_plate_temp_initial_layer = 0
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_is_support = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_lift_above = 0
+filament_retract_lift_below = 0
+filament_retract_lift_enforce = All Surfaces
+filament_shrink = 100%
+filament_toolchange_delay = 0
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+material_flow_dependent_temperature = 0
+material_flow_temp_graph = [[3.5,200],[7.0,240]]
+pressure_advance = 0.02
+required_nozzle_HRC = 0
+support_material_interface_fan_speed = -1

print_config/prusa_slicer/materials/Hyper_L-W_PLA.ini

@@ -0,0 +1,96 @@
+[metadata]
+show_name = Hyper L-W PLA
+material_type = pla
+
+
+[settings]
+cool_plate_temp = 50
+eng_plate_temp = 45
+hot_plate_temp = 60
+textured_plate_temp = 60
+cool_plate_temp_initial_layer = 50
+eng_plate_temp_initial_layer = 45
+hot_plate_temp_initial_layer = 60
+textured_plate_temp_initial_layer = 60
+overhang_fan_threshold = 50%
+overhang_fan_speed = 100
+slow_down_for_layer_cooling = 1
+close_fan_the_first_x_layers = 1
+filament_end_gcode = ;filament end gcode 
+filament_flow_ratio = 0.75
+reduce_fan_stop_start_freq = 1
+fan_cooling_layer_time = 100
+filament_cost = 48.9
+filament_density = 1.21
+filament_deretraction_speed = 15
+filament_diameter = 1.75
+filament_max_volumetric_speed = 4
+filament_minimal_purge_on_wipe_tower = 15
+filament_retraction_minimum_travel = 3
+filament_retract_before_wipe = nil
+filament_retract_when_changing_layer = nil
+filament_retraction_length = 0.6
+filament_z_hop = nil
+filament_z_hop_types = nil
+filament_retract_restart_extra = nil
+filament_retraction_speed = 15
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PLA
+filament_vendor = Creality
+filament_wipe = nil
+filament_wipe_distance = nil
+bed_type = Cool Plate
+nozzle_temperature_initial_layer = 220
+full_fan_speed_layer = 0
+fan_max_speed = 100
+fan_min_speed = 60
+slow_down_min_speed = 10
+slow_down_layer_time = 10
+filament_start_gcode = ;filament start gcode
+nozzle_temperature = 220
+temperature_vitrification = 60
+filament_adhesiveness_category = 100
+nozzle_temperature_range_low = 200
+nozzle_temperature_range_high = 270
+additional_cooling_fan_speed = 0
+activate_air_filtration = 0
+activate_chamber_temp_control = 0
+chamber_temperature = 0
+complete_print_exhaust_fan_speed = 80
+cool_cds_fan_start_at_height = 0.5
+cool_special_cds_fan_speed = 0
+customized_plate_temp = 60
+customized_plate_temp_initial_layer = 60
+default_filament_colour = ""
+during_print_exhaust_fan_speed = 60
+enable_overhang_bridge_fan = 1
+enable_pressure_advance = 1
+enable_special_area_additional_cooling_fan = 0
+epoxy_resin_plate_temp = 60
+epoxy_resin_plate_temp_initial_layer = 60
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_is_support = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_lift_enforce = nil
+filament_shrink = 100%
+filament_shrinkage_compensation_z = 100%
+filament_toolchange_delay = 0
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+material_flow_dependent_temperature = 0
+pressure_advance = 0.1
+required_nozzle_HRC = 0
+support_material_interface_fan_speed = -1

print_config/prusa_slicer/materials/Hyper_Marble_PLA.ini

@@ -0,0 +1,97 @@
+[metadata]
+show_name = Hyper Marble PLA
+material_type = pla
+
+
+[settings]
+cool_plate_temp = 50
+eng_plate_temp = 45
+hot_plate_temp = 50
+textured_plate_temp = 50
+cool_plate_temp_initial_layer = 50
+eng_plate_temp_initial_layer = 45
+hot_plate_temp_initial_layer = 50
+textured_plate_temp_initial_layer = 50
+overhang_fan_threshold = 50%
+overhang_fan_speed = 100
+slow_down_for_layer_cooling = 1
+close_fan_the_first_x_layers = 1
+filament_end_gcode = ;filament end gcode 
+filament_flow_ratio = 0.95
+reduce_fan_stop_start_freq = 1
+fan_cooling_layer_time = 100
+filament_cost = 23.9
+filament_density = 1.25
+filament_deretraction_speed = 15
+filament_diameter = 1.75
+filament_max_volumetric_speed = 18
+filament_minimal_purge_on_wipe_tower = 15
+filament_retraction_minimum_travel = 2
+filament_retract_before_wipe = nil
+filament_retract_when_changing_layer = nil
+filament_retraction_length = 1.5
+filament_z_hop = nil
+filament_z_hop_types = nil
+filament_retract_restart_extra = nil
+filament_retraction_speed = 15
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PLA
+filament_vendor = Creality
+filament_wipe = nil
+filament_wipe_distance = 3
+bed_type = Cool Plate
+nozzle_temperature_initial_layer = 220
+full_fan_speed_layer = 0
+fan_max_speed = 100
+fan_min_speed = 100
+slow_down_min_speed = 20
+slow_down_layer_time = 14
+filament_start_gcode = ;filament start gcode
+nozzle_temperature = 220
+temperature_vitrification = 60
+filament_adhesiveness_category = 100
+nozzle_temperature_range_low = 190
+nozzle_temperature_range_high = 240
+additional_cooling_fan_speed = 0
+activate_air_filtration = 0
+activate_chamber_temp_control = 0
+chamber_temperature = 0
+complete_print_exhaust_fan_speed = 80
+cool_cds_fan_start_at_height = 0
+cool_special_cds_fan_speed = 0
+customized_plate_temp = 50
+customized_plate_temp_initial_layer = 50
+default_filament_colour = ""
+during_print_exhaust_fan_speed = 60
+enable_overhang_bridge_fan = 1
+enable_pressure_advance = 1
+enable_special_area_additional_cooling_fan = 0
+epoxy_resin_plate_temp = 50
+epoxy_resin_plate_temp_initial_layer = 50
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_is_support = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_lift_enforce = nil
+filament_shrink = 100%
+filament_shrinkage_compensation_z = 100%
+filament_toolchange_delay = 0
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+material_flow_dependent_temperature = 0
+material_flow_temp_graph = [[0.8,200],[1.0,200],[1.2,220]]
+pressure_advance = 0.04
+required_nozzle_HRC = 0
+support_material_interface_fan_speed = -1

print_config/prusa_slicer/materials/Hyper_PETG.ini

@@ -0,0 +1,94 @@
+[metadata]
+show_name = Hyper PETG
+material_type = petg
+
+
+[settings]
+filament_adhesiveness_category = 300
+cool_plate_temp = 60
+eng_plate_temp = 0
+hot_plate_temp = 70
+textured_plate_temp = 70
+cool_plate_temp_initial_layer = 60
+eng_plate_temp_initial_layer = 0
+hot_plate_temp_initial_layer = 70
+textured_plate_temp_initial_layer = 70
+overhang_fan_threshold = 25%
+overhang_fan_speed = 90
+slow_down_for_layer_cooling = 1
+close_fan_the_first_x_layers = 3
+filament_end_gcode = ;filament end gcode \n
+filament_flow_ratio = 1.0
+reduce_fan_stop_start_freq = 1
+fan_cooling_layer_time = 30
+filament_cost = 69
+filament_density = 1.27
+filament_deretraction_speed = nil
+filament_diameter = 1.75
+filament_max_volumetric_speed = 10
+filament_minimal_purge_on_wipe_tower = 15
+filament_retraction_minimum_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_when_changing_layer = nil
+filament_retraction_length = 1.2
+filament_z_hop = 0.2
+filament_z_hop_types = nil
+filament_retract_restart_extra = 0
+filament_retraction_speed = nil
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PETG
+filament_vendor = Creality
+filament_wipe = nil
+filament_wipe_distance = 2
+bed_type = Cool Plate
+nozzle_temperature_initial_layer = 235
+full_fan_speed_layer = 0
+fan_max_speed = 80
+fan_min_speed = 40
+slow_down_min_speed = 10
+slow_down_layer_time = 8
+filament_start_gcode = ;filament start gcode\n
+nozzle_temperature = 240
+temperature_vitrification = 80
+activate_air_filtration = 0
+activate_chamber_temp_control = 0
+additional_cooling_fan_speed = 0
+chamber_temperature = 0
+complete_print_exhaust_fan_speed = 80
+cool_cds_fan_start_at_height = 0
+cool_special_cds_fan_speed = 0
+default_filament_colour = ""
+during_print_exhaust_fan_speed = 60
+enable_overhang_bridge_fan = 1
+enable_pressure_advance = 1
+enable_special_area_additional_cooling_fan = 0
+epoxy_resin_plate_temp = 0
+epoxy_resin_plate_temp_initial_layer = 0
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_is_support = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_lift_above = 0
+filament_retract_lift_below = 0
+filament_retract_lift_enforce = All Surfaces
+filament_shrink = 100%
+filament_toolchange_delay = 0
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+material_flow_dependent_temperature = 1
+material_flow_temp_graph = [[3.0,230],[10.0,240],[20.0,250]]
+nozzle_temperature_range_high = 270
+nozzle_temperature_range_low = 220
+pressure_advance = 0.07
+required_nozzle_HRC = 0
+support_material_interface_fan_speed = -1

print_config/prusa_slicer/materials/Hyper_PLA.ini

@@ -0,0 +1,94 @@
+[metadata]
+show_name = Hyper PLA
+material_type = pla
+
+
+[settings]
+cool_plate_temp = 50
+eng_plate_temp = 45
+hot_plate_temp = 50
+textured_plate_temp = 50
+cool_plate_temp_initial_layer = 50
+eng_plate_temp_initial_layer = 45
+hot_plate_temp_initial_layer = 50
+textured_plate_temp_initial_layer = 50
+overhang_fan_threshold = 50%
+overhang_fan_speed = 100
+slow_down_for_layer_cooling = 1
+close_fan_the_first_x_layers = 1
+filament_end_gcode = ;filament end gcode 
+filament_flow_ratio = 0.95
+reduce_fan_stop_start_freq = 1
+fan_cooling_layer_time = 100
+filament_cost = 30
+filament_density = 1.24
+filament_deretraction_speed = nil
+filament_diameter = 1.75
+filament_max_volumetric_speed = 23
+filament_minimal_purge_on_wipe_tower = 15
+filament_retraction_minimum_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_when_changing_layer = nil
+filament_retraction_length = 1.2
+filament_z_hop = 0.2
+filament_z_hop_types = Slope Lift
+filament_retract_restart_extra = 0
+filament_retraction_speed = 40
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PLA
+filament_vendor = Creality
+filament_wipe = nil
+filament_wipe_distance = nil
+bed_type = Cool Plate
+nozzle_temperature_initial_layer = 190
+full_fan_speed_layer = 0
+fan_max_speed = 100
+fan_min_speed = 100
+slow_down_min_speed = 20
+slow_down_layer_time = 6
+filament_start_gcode = ;filament start gcode
+nozzle_temperature = 190
+temperature_vitrification = 100
+filament_adhesiveness_category = 100
+nozzle_temperature_range_low = 190
+nozzle_temperature_range_high = 240
+additional_cooling_fan_speed = 0
+activate_air_filtration = 0
+activate_chamber_temp_control = 0
+chamber_temperature = 0
+complete_print_exhaust_fan_speed = 80
+cool_cds_fan_start_at_height = 0
+cool_special_cds_fan_speed = 0
+default_filament_colour = ""
+during_print_exhaust_fan_speed = 60
+enable_overhang_bridge_fan = 1
+enable_pressure_advance = 0
+enable_special_area_additional_cooling_fan = 0
+epoxy_resin_plate_temp = 0
+epoxy_resin_plate_temp_initial_layer = 0
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_is_support = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_lift_above = 0
+filament_retract_lift_below = 0
+filament_retract_lift_enforce = All Surfaces
+filament_shrink = 100%
+filament_toolchange_delay = 0
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+material_flow_dependent_temperature = 0
+material_flow_temp_graph = [[3.5,200],[7.0,240]]
+pressure_advance = 0.02
+required_nozzle_HRC = 0
+support_material_interface_fan_speed = -1

print_config/prusa_slicer/materials/Hyper_Stardust_PLA.ini

@@ -0,0 +1,97 @@
+[metadata]
+show_name = Hyper Stardust PLA
+material_type = pla
+
+
+[settings]
+cool_plate_temp = 50
+eng_plate_temp = 45
+hot_plate_temp = 50
+textured_plate_temp = 50
+cool_plate_temp_initial_layer = 50
+eng_plate_temp_initial_layer = 45
+hot_plate_temp_initial_layer = 50
+textured_plate_temp_initial_layer = 50
+overhang_fan_threshold = 50%
+overhang_fan_speed = 100
+slow_down_for_layer_cooling = 1
+close_fan_the_first_x_layers = 1
+filament_end_gcode = ;filament end gcode 
+filament_flow_ratio = 0.95
+reduce_fan_stop_start_freq = 1
+fan_cooling_layer_time = 100
+filament_cost = 26.9
+filament_density = 1.24
+filament_deretraction_speed = 15
+filament_diameter = 1.75
+filament_max_volumetric_speed = 18
+filament_minimal_purge_on_wipe_tower = 15
+filament_retraction_minimum_travel = 2
+filament_retract_before_wipe = nil
+filament_retract_when_changing_layer = nil
+filament_retraction_length = 2
+filament_z_hop = nil
+filament_z_hop_types = nil
+filament_retract_restart_extra = nil
+filament_retraction_speed = 15
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PLA
+filament_vendor = Creality
+filament_wipe = nil
+filament_wipe_distance = 3
+bed_type = Cool Plate
+nozzle_temperature_initial_layer = 220
+full_fan_speed_layer = 0
+fan_max_speed = 100
+fan_min_speed = 100
+slow_down_min_speed = 10
+slow_down_layer_time = 14
+filament_start_gcode = ;filament start gcode
+nozzle_temperature = 220
+temperature_vitrification = 60
+filament_adhesiveness_category = 100
+nozzle_temperature_range_low = 190
+nozzle_temperature_range_high = 240
+additional_cooling_fan_speed = 0
+activate_air_filtration = 0
+activate_chamber_temp_control = 0
+chamber_temperature = 0
+complete_print_exhaust_fan_speed = 80
+cool_cds_fan_start_at_height = 0.5
+cool_special_cds_fan_speed = 0
+customized_plate_temp = 50
+customized_plate_temp_initial_layer = 50
+default_filament_colour = ""
+during_print_exhaust_fan_speed = 60
+enable_overhang_bridge_fan = 1
+enable_pressure_advance = 1
+enable_special_area_additional_cooling_fan = 0
+epoxy_resin_plate_temp = 50
+epoxy_resin_plate_temp_initial_layer = 50
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_is_support = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_lift_enforce = nil
+filament_shrink = 100%
+filament_shrinkage_compensation_z = 100%
+filament_toolchange_delay = 0
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+material_flow_dependent_temperature = 0
+material_flow_temp_graph = [[0.8,200],[1.0,200],[1.2,220]]
+pressure_advance = 0.04
+required_nozzle_HRC = 0
+support_material_interface_fan_speed = -1

print_config/prusa_slicer/materials/Soleyin_Ultra_PLA.ini

@@ -0,0 +1,97 @@
+[metadata]
+show_name = Soleyin Ultra PLA
+material_type = pla
+
+
+[settings]
+cool_plate_temp = 50
+eng_plate_temp = 45
+hot_plate_temp = 50
+textured_plate_temp = 50
+cool_plate_temp_initial_layer = 50
+eng_plate_temp_initial_layer = 45
+hot_plate_temp_initial_layer = 50
+textured_plate_temp_initial_layer = 50
+overhang_fan_threshold = 50%
+overhang_fan_speed = 100
+slow_down_for_layer_cooling = 1
+close_fan_the_first_x_layers = 1
+filament_end_gcode = ;filament end gcode 
+filament_flow_ratio = 0.96
+reduce_fan_stop_start_freq = 1
+fan_cooling_layer_time = 100
+filament_cost = 6
+filament_density = 1.25
+filament_deretraction_speed = 15
+filament_diameter = 1.75
+filament_max_volumetric_speed = 16
+filament_minimal_purge_on_wipe_tower = 15
+filament_retraction_minimum_travel = nil
+filament_retract_before_wipe = 90%
+filament_retract_when_changing_layer = nil
+filament_retraction_length = nil
+filament_z_hop = nil
+filament_z_hop_types = nil
+filament_retract_restart_extra = nil
+filament_retraction_speed = 15
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PLA
+filament_vendor = Creality
+filament_wipe = nil
+filament_wipe_distance = nil
+bed_type = Cool Plate
+nozzle_temperature_initial_layer = 220
+full_fan_speed_layer = 0
+fan_max_speed = 100
+fan_min_speed = 100
+slow_down_min_speed = 20
+slow_down_layer_time = 12
+filament_start_gcode = ;filament start gcode
+nozzle_temperature = 220
+temperature_vitrification = 60
+filament_adhesiveness_category = 100
+nozzle_temperature_range_low = 190
+nozzle_temperature_range_high = 240
+additional_cooling_fan_speed = 0
+activate_air_filtration = 0
+activate_chamber_temp_control = 0
+chamber_temperature = 0
+complete_print_exhaust_fan_speed = 80
+cool_cds_fan_start_at_height = 0
+cool_special_cds_fan_speed = 0
+customized_plate_temp = 60
+customized_plate_temp_initial_layer = 60
+default_filament_colour = ""
+during_print_exhaust_fan_speed = 60
+enable_overhang_bridge_fan = 1
+enable_pressure_advance = 1
+enable_special_area_additional_cooling_fan = 0
+epoxy_resin_plate_temp = 60
+epoxy_resin_plate_temp_initial_layer = 60
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_is_support = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_lift_enforce = nil
+filament_shrink = 100%
+filament_shrinkage_compensation_z = 100%
+filament_toolchange_delay = 0
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+material_flow_dependent_temperature = 0
+material_flow_temp_graph = [[1.0,200],[1.1,200],[1.2,220]]
+pressure_advance = 0.05
+required_nozzle_HRC = 0
+support_material_interface_fan_speed = -1

print_config/prusa_slicer/printers/Ender3_V3_SE.ini

@@ -0,0 +1,104 @@
+[metadata]
+show_name = Ender3 V3 SE Model
+
+
+[settings]
+family = Creality
+printer_technology = FFF
+deretraction_speed = 30
+extruder_colour = #FCE94F
+extruder_offset = 0x0
+gcode_flavor = marlin2
+silent_mode = 0
+support_chamber_temp_control = 0
+support_air_filtration = 0
+machine_max_acceleration_e = 5000,5000
+machine_max_acceleration_extruding = 5000,5000
+machine_max_acceleration_retracting = 2500,2500
+machine_max_acceleration_x = 5000,5000
+machine_max_acceleration_y = 5000,5000
+machine_max_acceleration_z = 500,500
+machine_max_speed_e = 100,100
+machine_max_speed_x = 500,500
+machine_max_speed_y = 500,500
+machine_max_speed_z = 30,30
+machine_max_jerk_e = 5,5
+machine_max_jerk_x = 10,10
+machine_max_jerk_y = 10,10
+machine_max_jerk_z = 0.4,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_layer_height = 0.36
+min_layer_height = 0.08
+printable_height = 250
+extruder_clearance_radius = 90
+extruder_clearance_height_to_rod = 47
+extruder_clearance_height_to_lid = 34
+nozzle_diameter = 0.4
+printer_settings_id = 
+printer_variant = 0.4
+retraction_minimum_travel = 1
+retract_before_wipe = 100
+retract_when_changing_layer = 1
+retraction_length = 0.8
+retract_length_toolchange = 1
+z_hop = 0.4
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retraction_speed = 30
+single_extruder_multi_material = 1
+change_filament_gcode = 
+wipe = 1
+z_hop_types = Slope Lift
+before_layer_change_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n
+default_print_profile = 0.20mm Standard @Creality Ender-3 V3 SE 0.4 nozzle
+machine_start_gcode = M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \n \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0  ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800
+machine_end_gcode = G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z
+machine_max_acceleration_travel = 5000,5000
+machine_pause_gcode = M25
+bed_exclude_area = 0x0
+layer_change_gcode = 
+scan_first_layer = 0
+nozzle_type = brass
+auxiliary_fan = 0
+printer_model = Creality Ender-3 V3 SE
+printer_structure = i3
+bbl_use_printhost = 0
+bed_mesh_max = 99999,99999
+bed_mesh_min = -99999,-99999
+bed_mesh_probe_distance = 50,50
+best_object_pos = 0.5,0.5
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+creality_flush_time = 86.0
+disable_m73 = 0
+emit_machine_limits_to_gcode = 1
+enable_filament_ramming = 1
+extra_loading_move = -2
+fan_kickstart = 0
+fan_speedup_overhangs = 1
+fan_speedup_time = 0
+high_current_on_filament_swap = 0
+machine_LED_light_exist = 0
+machine_load_filament_time = 11
+machine_platform_motion_enable = 0
+machine_unload_filament_time = 0
+manual_filament_change = 1
+nozzle_hrc = 0
+nozzle_volume = 0
+parking_pos_retraction = 92
+preferred_orientation = 0
+printable_area = 0x0,220x0,220x220,0x220
+purge_in_prime_tower = 1
+support_multi_bed_types = 1
+time_cost = 0
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+z_offset = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_lift_enforce = All Surfaces
+wipe_distance = 2
+
+
+

print_config/prusa_slicer/quality/0.08mm_Extra_Fine.ini

@@ -0,0 +1,216 @@
+[metadata]
+show_name = 0.08mm Extra Fine Quality
+
+
+[settings]
+adaptive_layer_height = 0
+reduce_crossing_wall = 0
+bridge_flow = 0.8
+bridge_speed = 25
+brim_width = 5
+print_sequence = by layer
+default_acceleration = 2500
+bridge_no_support = 0
+elefant_foot_compensation = 0.15
+outer_wall_line_width = 0.42
+outer_wall_speed = 60
+line_width = 0.46
+infill_direction = 45
+sparse_infill_density = 10%
+sparse_infill_pattern = zig-zag
+initial_layer_line_width = 0.46
+initial_layer_print_height = 0.2
+initial_layer_speed = 60
+gap_infill_speed = 50
+infill_combination = 0
+sparse_infill_line_width = 0.45
+infill_wall_overlap = 15%
+sparse_infill_speed = 180
+interface_shells = 0
+detect_overhang_wall = 1
+reduce_infill_retraction = 1
+wall_loops = 2
+inner_wall_line_width = 0.45
+inner_wall_speed = 90
+print_settings_id = 
+raft_layers = 0
+seam_position = aligned
+skirt_distance = 2
+skirt_height = 2
+minimum_sparse_infill_area = 10
+internal_solid_infill_line_width = 0.42
+internal_solid_infill_speed = 180
+spiral_mode = 0
+standby_temperature_delta = -5
+detect_thin_wall = 1
+top_surface_line_width = 0.42
+top_surface_speed = 50
+travel_speed = 150
+enable_prime_tower = 0
+prime_tower_width = 60
+xy_hole_compensation = 0
+xy_contour_compensation = 0
+max_travel_detour_distance = 0
+bottom_surface_pattern = monotonic
+bottom_shell_layers = 7
+bottom_shell_thickness = 0
+brim_object_gap = 0.1
+compatible_printers_condition = 
+top_surface_acceleration = 2500
+draft_shield = disabled
+enable_arc_fitting = 0
+wall_infill_order = inner wall/outer wall/infill
+initial_layer_acceleration = 500
+travel_acceleration = 2500
+inner_wall_acceleration = 2000
+ironing_flow = 15%
+ironing_spacing = 0.1
+ironing_speed = 20
+ironing_type = no ironing
+layer_height = 0.08
+overhang_1_4_speed = 0
+overhang_2_4_speed = 20
+overhang_3_4_speed = 15
+overhang_4_4_speed = 10
+skirt_loops = 0
+resolution = 0.012
+top_surface_pattern = monotonicline
+top_shell_layers = 9
+top_shell_thickness = 0.8
+initial_layer_infill_speed = 80
+wipe_tower_no_sparse_layers = 0
+accel_to_decel_enable = 1
+accel_to_decel_factor = 50%
+acceleration_limit_mess = [[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]
+acceleration_limit_mess_enable = 0
+alternate_extra_wall = 0
+bottom_solid_infill_flow_ratio = 1
+bridge_acceleration = 50%
+bridge_angle = 0
+bridge_density = 100%
+brim_ears_detection_length = 1
+brim_ears_max_angle = 125
+brim_type = no_brim
+default_jerk = 8
+detect_narrow_internal_solid_infill = 1
+elefant_foot_compensation_layers = 1
+enable_overhang_speed = 1
+enforce_support_layers = 0
+ensure_vertical_shell_thickness = ensure_all
+exclude_object = 0
+extra_perimeters_on_overhangs = 0
+filter_out_gap_fill = 0
+flush_into_infill = 0
+flush_into_objects = 0
+flush_into_support = 1
+fuzzy_skin = none
+fuzzy_skin_first_layer = 0
+fuzzy_skin_point_distance = 0.8
+fuzzy_skin_thickness = 0.3
+gcode_add_line_number = 0
+gcode_comments = 0
+gcode_label_objects = 1
+hole_to_polyhole = 0
+hole_to_polyhole_threshold = 0.01
+hole_to_polyhole_twisted = 1
+independent_support_layer_height = 1
+infill_anchor = 400%
+infill_anchor_max = 20
+infill_jerk = 20
+initial_layer_jerk = 8
+initial_layer_min_bead_width = 85%
+initial_layer_travel_speed = 100%
+inner_wall_jerk = 20
+internal_bridge_flow = 1
+internal_bridge_speed = 150%
+internal_solid_infill_acceleration = 100%
+internal_solid_infill_pattern = monotonic
+ironing_angle = -1
+ironing_pattern = zig-zag
+ironing_support_layer = 0
+is_infill_first = 0
+make_overhang_printable = 0
+make_overhang_printable_angle = 55
+make_overhang_printable_hole_size = 0
+max_bridge_length = 10
+max_volumetric_extrusion_rate_slope = 0
+max_volumetric_extrusion_rate_slope_segment_length = 3
+min_bead_width = 85%
+min_feature_size = 25%
+min_width_top_surface = 300%
+minimum_support_area = 5
+mmu_segmented_region_interlocking_depth = 0
+mmu_segmented_region_max_width = 0
+only_one_wall_first_layer = 0
+only_one_wall_top = 0
+ooze_prevention = 0
+outer_wall_acceleration = 1000
+outer_wall_jerk = 20
+overhang_reverse = 0
+overhang_reverse_internal_only = 0
+overhang_reverse_threshold = 50%
+overhang_speed_classic = 0
+precise_outer_wall = 0
+prime_tower_brim_width = 3
+prime_tower_enhance_type = chamfer
+prime_volume = 45
+print_flow_ratio = 1
+print_order = default
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 2
+role_based_wipe_speed = 1
+scarf_angle_threshold = 155
+scarf_joint_flow_ratio = 1
+scarf_joint_speed = 100%
+scarf_overhang_threshold = 40%
+seam_gap = 10%
+seam_slope_conditional = 0
+seam_slope_entire_loop = 0
+seam_slope_inner_walls = 0
+seam_slope_min_length = 20
+seam_slope_start_height = 0
+seam_slope_steps = 10
+seam_slope_type = none
+single_extruder_multi_material_priming = 0
+skirt_speed = 50
+slice_closing_radius = 0.049
+slicing_mode = regular
+slow_down_layers = 0
+slowdown_for_curled_perimeters = 0
+small_area_infill_flow_compensation = 0
+small_area_infill_flow_compensation_model = 0,0;\n0.2,0.4444;\n0.4,0.6145;\n0.6,0.7059;\n0.8,0.7619;\n1.5,0.8571;\n2,0.8889;\n3,0.9231;\n5,0.9520;\n10,1
+small_perimeter_speed = 50%
+small_perimeter_threshold = 0
+solid_infill_filament = 1
+sparse_infill_acceleration = 100%
+sparse_infill_filament = 1
+speed_limit_to_height = [[100,150,200,6000],[150,200,200,4000],[200,250,200,2000]]
+speed_limit_to_height_enable = 0
+spiral_mode_max_xy_smoothing = 200%
+spiral_mode_smooth = 0
+staggered_inner_seams = 1
+thick_bridges = 0
+thick_internal_bridges = 1
+timelapse_type = 0
+top_solid_infill_flow_ratio = 1
+top_surface_jerk = 9
+travel_jerk = 12
+travel_speed_z = 0
+wall_direction = auto
+wall_distribution_count = 1
+wall_filament = 1
+wall_generator = arachne
+wall_sequence = inner wall/outer wall
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 100%
+wipe_before_external_loop = 0
+wipe_on_loops = 0
+wipe_speed = 80%
+wipe_tower_bridging = 10
+wipe_tower_cone_angle = 0
+wipe_tower_extra_spacing = 100%
+wipe_tower_rotation_angle = 0
+wiping_volumes_extruders = 70,70,70,70,70,70,70,70,70,70

print_config/prusa_slicer/quality/0.12mm_Fine.ini

@@ -0,0 +1,200 @@
+[metadata]
+show_name = 0.12mm Fine Quality
+
+
+[settings]
+adaptive_layer_height = 0
+reduce_crossing_wall = 0
+bridge_flow = 0.95
+bridge_speed = 100
+brim_width = 5
+print_sequence = by layer
+default_acceleration = 2500
+bridge_no_support = 0
+elefant_foot_compensation = 0
+outer_wall_line_width = 0.42
+outer_wall_speed = 60
+line_width = 0.46
+infill_direction = 45
+sparse_infill_density = 15%
+sparse_infill_pattern = grid
+initial_layer_line_width = 0.46
+initial_layer_print_height = 0.2
+initial_layer_speed = 30
+gap_infill_speed = 50
+infill_combination = 0
+sparse_infill_line_width = 0.45
+infill_wall_overlap = 15%
+sparse_infill_speed = 180
+interface_shells = 0
+detect_overhang_wall = 1
+reduce_infill_retraction = 1
+wall_loops = 2
+inner_wall_line_width = 0.45
+inner_wall_speed = 90
+print_settings_id = 
+raft_layers = 0
+seam_position = aligned
+skirt_distance = 2
+skirt_height = 2
+minimum_sparse_infill_area = 10
+internal_solid_infill_line_width = 0.42
+internal_solid_infill_speed = 180
+spiral_mode = 0
+standby_temperature_delta = -5
+detect_thin_wall = 1
+top_surface_line_width = 0.42
+top_surface_speed = 50
+travel_speed = 150
+enable_prime_tower = 0
+prime_tower_width = 60
+xy_hole_compensation = 0
+xy_contour_compensation = 0
+max_travel_detour_distance = 0
+bottom_surface_pattern = monotonic
+bottom_shell_layers = 5
+bottom_shell_thickness = 0
+brim_object_gap = 0.1
+compatible_printers_condition = 
+top_surface_acceleration = 2500
+draft_shield = disabled
+enable_arc_fitting = 0
+wall_infill_order = inner wall/outer wall/infill
+initial_layer_acceleration = 500
+travel_acceleration = 2500
+inner_wall_acceleration = 2000
+ironing_flow = 15%
+ironing_spacing = 0.1
+ironing_speed = 20
+ironing_type = no ironing
+layer_height = 0.12
+overhang_1_4_speed = 0
+overhang_2_4_speed = 20
+overhang_3_4_speed = 15
+overhang_4_4_speed = 10
+skirt_loops = 0
+resolution = 0.012
+top_surface_pattern = monotonic
+top_shell_layers = 5
+top_shell_thickness = 0.8
+initial_layer_infill_speed = 80
+wipe_tower_no_sparse_layers = 0
+accel_to_decel_enable = 1
+accel_to_decel_factor = 50%
+acceleration_limit_mess = [[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]
+acceleration_limit_mess_enable = 0
+alternate_extra_wall = 0
+bottom_solid_infill_flow_ratio = 1
+bridge_acceleration = 50%
+bridge_angle = 0
+bridge_density = 100%
+brim_ears_detection_length = 1
+brim_ears_max_angle = 125
+brim_type = no_brim
+default_jerk = 8
+detect_narrow_internal_solid_infill = 1
+elefant_foot_compensation_layers = 1
+enable_overhang_speed = 1
+enforce_support_layers = 0
+ensure_vertical_shell_thickness = ensure_all
+exclude_object = 0
+extra_perimeters_on_overhangs = 0
+filter_out_gap_fill = 0
+flush_into_infill = 0
+flush_into_objects = 0
+flush_into_support = 1
+fuzzy_skin = none
+fuzzy_skin_first_layer = 0
+fuzzy_skin_point_distance = 0.8
+fuzzy_skin_thickness = 0.3
+gcode_add_line_number = 0
+gcode_comments = 0
+gcode_label_objects = 1
+hole_to_polyhole = 0
+hole_to_polyhole_threshold = 0.01
+hole_to_polyhole_twisted = 1
+independent_support_layer_height = 1
+infill_anchor = 400%
+infill_anchor_max = 20
+infill_jerk = 20
+initial_layer_jerk = 8
+initial_layer_min_bead_width = 85%
+initial_layer_travel_speed = 100%
+inner_wall_jerk = 20
+internal_bridge_flow = 1
+internal_bridge_speed = 150%
+internal_solid_infill_acceleration = 100%
+internal_solid_infill_pattern = monotonic
+ironing_angle = -1
+ironing_pattern = zig-zag
+ironing_support_layer = 0
+is_infill_first = 0
+make_overhang_printable = 0
+make_overhang_printable_angle = 55
+make_overhang_printable_hole_size = 0
+max_bridge_length = 10
+max_volumetric_extrusion_rate_slope = 0
+max_volumetric_extrusion_rate_slope_segment_length = 3
+min_bead_width = 85%
+min_feature_size = 25%
+min_width_top_surface = 300%
+minimum_support_area = 5
+mmu_segmented_region_interlocking_depth = 0
+mmu_segmented_region_max_width = 0
+only_one_wall_first_layer = 0
+only_one_wall_top = 0
+ooze_prevention = 0
+outer_wall_acceleration = 1000
+outer_wall_jerk = 20
+overhang_reverse = 0
+overhang_reverse_internal_only = 0
+overhang_reverse_threshold = 50%
+overhang_speed_classic = 0
+precise_outer_wall = 0
+prime_tower_brim_width = 3
+prime_volume = 45
+print_flow_ratio = 1
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 2
+role_based_wipe_speed = 1
+seam_gap = 10%
+single_extruder_multi_material_priming = 0
+skirt_speed = 50
+slice_closing_radius = 0.049
+slicing_mode = regular
+slow_down_layers = 0
+slowdown_for_curled_perimeters = 0
+small_perimeter_speed = 50%
+small_perimeter_threshold = 0
+solid_infill_filament = 1
+sparse_infill_acceleration = 100%
+sparse_infill_filament = 1
+speed_limit_to_height = [[100,150,100,6000],[150,200,80,5500],[200,250,60,5000]]
+speed_limit_to_height_enable = 0
+spiral_mode_max_xy_smoothing = 200%
+spiral_mode_smooth = 0
+staggered_inner_seams = 0
+thick_bridges = 0
+thick_internal_bridges = 1
+timelapse_type = 0
+top_solid_infill_flow_ratio = 1
+top_surface_jerk = 20
+travel_jerk = 8
+travel_speed_z = 0
+wall_distribution_count = 1
+wall_filament = 1
+wall_generator = arachne
+wall_sequence = inner wall/outer wall
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 100%
+wipe_before_external_loop = 0
+wipe_on_loops = 0
+wipe_speed = 80%
+wipe_tower_bridging = 10
+wipe_tower_cone_angle = 0
+wipe_tower_extra_spacing = 100%
+wipe_tower_rotation_angle = 0
+wiping_volumes_extruders = 70,70,70,70,70,70,70,70,70,70

print_config/prusa_slicer/quality/0.16mm_Optimal.ini

@@ -0,0 +1,200 @@
+[metadata]
+show_name = 0.16mm Optimal Quality
+
+
+[settings]
+adaptive_layer_height = 0
+reduce_crossing_wall = 0
+bridge_flow = 0.95
+bridge_speed = 100
+brim_width = 5
+print_sequence = by layer
+default_acceleration = 2500
+bridge_no_support = 0
+elefant_foot_compensation = 0
+outer_wall_line_width = 0.42
+outer_wall_speed = 60
+line_width = 0.46
+infill_direction = 45
+sparse_infill_density = 15%
+sparse_infill_pattern = grid
+initial_layer_line_width = 0.46
+initial_layer_print_height = 0.2
+initial_layer_speed = 30
+gap_infill_speed = 50
+infill_combination = 0
+sparse_infill_line_width = 0.45
+infill_wall_overlap = 15%
+sparse_infill_speed = 180
+interface_shells = 0
+detect_overhang_wall = 1
+reduce_infill_retraction = 1
+wall_loops = 2
+inner_wall_line_width = 0.45
+inner_wall_speed = 90
+print_settings_id = 
+raft_layers = 0
+seam_position = aligned
+skirt_distance = 2
+skirt_height = 2
+minimum_sparse_infill_area = 10
+internal_solid_infill_line_width = 0.42
+internal_solid_infill_speed = 180
+spiral_mode = 0
+standby_temperature_delta = -5
+detect_thin_wall = 1
+top_surface_line_width = 0.42
+top_surface_speed = 50
+travel_speed = 150
+enable_prime_tower = 0
+prime_tower_width = 60
+xy_hole_compensation = 0
+xy_contour_compensation = 0
+max_travel_detour_distance = 0
+bottom_surface_pattern = monotonic
+bottom_shell_layers = 4
+bottom_shell_thickness = 0
+brim_object_gap = 0.1
+compatible_printers_condition = 
+top_surface_acceleration = 2500
+draft_shield = disabled
+enable_arc_fitting = 0
+wall_infill_order = inner wall/outer wall/infill
+initial_layer_acceleration = 500
+travel_acceleration = 2500
+inner_wall_acceleration = 2000
+ironing_flow = 15%
+ironing_spacing = 0.1
+ironing_speed = 20
+ironing_type = no ironing
+layer_height = 0.16
+overhang_1_4_speed = 0
+overhang_2_4_speed = 20
+overhang_3_4_speed = 15
+overhang_4_4_speed = 10
+skirt_loops = 0
+resolution = 0.012
+top_surface_pattern = monotonic
+top_shell_layers = 6
+top_shell_thickness = 0.8
+initial_layer_infill_speed = 80
+wipe_tower_no_sparse_layers = 0
+accel_to_decel_enable = 1
+accel_to_decel_factor = 50%
+acceleration_limit_mess = [[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]
+acceleration_limit_mess_enable = 0
+alternate_extra_wall = 0
+bottom_solid_infill_flow_ratio = 1
+bridge_acceleration = 50%
+bridge_angle = 0
+bridge_density = 100%
+brim_ears_detection_length = 1
+brim_ears_max_angle = 125
+brim_type = no_brim
+default_jerk = 8
+detect_narrow_internal_solid_infill = 1
+elefant_foot_compensation_layers = 1
+enable_overhang_speed = 1
+enforce_support_layers = 0
+ensure_vertical_shell_thickness = ensure_all
+exclude_object = 0
+extra_perimeters_on_overhangs = 0
+filter_out_gap_fill = 0
+flush_into_infill = 0
+flush_into_objects = 0
+flush_into_support = 1
+fuzzy_skin = none
+fuzzy_skin_first_layer = 0
+fuzzy_skin_point_distance = 0.8
+fuzzy_skin_thickness = 0.3
+gcode_add_line_number = 0
+gcode_comments = 0
+gcode_label_objects = 1
+hole_to_polyhole = 0
+hole_to_polyhole_threshold = 0.01
+hole_to_polyhole_twisted = 1
+independent_support_layer_height = 1
+infill_anchor = 400%
+infill_anchor_max = 20
+infill_jerk = 20
+initial_layer_jerk = 8
+initial_layer_min_bead_width = 85%
+initial_layer_travel_speed = 100%
+inner_wall_jerk = 20
+internal_bridge_flow = 1
+internal_bridge_speed = 150%
+internal_solid_infill_acceleration = 100%
+internal_solid_infill_pattern = monotonic
+ironing_angle = -1
+ironing_pattern = zig-zag
+ironing_support_layer = 0
+is_infill_first = 0
+make_overhang_printable = 0
+make_overhang_printable_angle = 55
+make_overhang_printable_hole_size = 0
+max_bridge_length = 10
+max_volumetric_extrusion_rate_slope = 0
+max_volumetric_extrusion_rate_slope_segment_length = 3
+min_bead_width = 85%
+min_feature_size = 25%
+min_width_top_surface = 300%
+minimum_support_area = 5
+mmu_segmented_region_interlocking_depth = 0
+mmu_segmented_region_max_width = 0
+only_one_wall_first_layer = 0
+only_one_wall_top = 0
+ooze_prevention = 0
+outer_wall_acceleration = 1000
+outer_wall_jerk = 20
+overhang_reverse = 0
+overhang_reverse_internal_only = 0
+overhang_reverse_threshold = 50%
+overhang_speed_classic = 0
+precise_outer_wall = 0
+prime_tower_brim_width = 3
+prime_volume = 45
+print_flow_ratio = 1
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 2
+role_based_wipe_speed = 1
+seam_gap = 10%
+single_extruder_multi_material_priming = 0
+skirt_speed = 50
+slice_closing_radius = 0.049
+slicing_mode = regular
+slow_down_layers = 0
+slowdown_for_curled_perimeters = 0
+small_perimeter_speed = 50%
+small_perimeter_threshold = 0
+solid_infill_filament = 1
+sparse_infill_acceleration = 100%
+sparse_infill_filament = 1
+speed_limit_to_height = [[100,150,100,6000],[150,200,80,5500],[200,250,60,5000]]
+speed_limit_to_height_enable = 0
+spiral_mode_max_xy_smoothing = 200%
+spiral_mode_smooth = 0
+staggered_inner_seams = 0
+thick_bridges = 0
+thick_internal_bridges = 1
+timelapse_type = 0
+top_solid_infill_flow_ratio = 1
+top_surface_jerk = 20
+travel_jerk = 8
+travel_speed_z = 0
+wall_distribution_count = 1
+wall_filament = 1
+wall_generator = arachne
+wall_sequence = inner wall/outer wall
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 100%
+wipe_before_external_loop = 0
+wipe_on_loops = 0
+wipe_speed = 80%
+wipe_tower_bridging = 10
+wipe_tower_cone_angle = 0
+wipe_tower_extra_spacing = 100%
+wipe_tower_rotation_angle = 0
+wiping_volumes_extruders = 70,70,70,70,70,70,70,70,70,70

print_config/prusa_slicer/quality/0.20mm_Standard.ini

@@ -0,0 +1,226 @@
+[metadata]
+show_name = 0.20mm Standard Quality
+
+
+[settings]
+adaptive_layer_height = 0
+reduce_crossing_wall = 0
+bridge_flow = 0.95
+bridge_speed = 50
+brim_width = 5
+print_sequence = by layer
+default_acceleration = 2500
+bridge_no_support = 0
+elefant_foot_compensation = 0.15
+outer_wall_line_width = 0.42
+outer_wall_speed = 60
+line_width = 0.45
+infill_direction = 45
+sparse_infill_density = 15%
+sparse_infill_pattern = zig-zag
+initial_layer_line_width = 0.5
+initial_layer_print_height = 0.2
+initial_layer_speed = 30
+gap_infill_speed = 50
+infill_combination = 0
+sparse_infill_line_width = 0.45
+infill_wall_overlap = 30
+sparse_infill_speed = 180
+interface_shells = 0
+detect_overhang_wall = 1
+reduce_infill_retraction = 1
+wall_loops = 2
+inner_wall_line_width = 0.45
+inner_wall_speed = 90
+print_settings_id = 
+raft_layers = 0
+seam_position = aligned
+skirt_distance = 2
+skirt_height = 2
+minimum_sparse_infill_area = 10
+internal_solid_infill_line_width = 0.42
+internal_solid_infill_speed = 180
+spiral_mode = 0
+standby_temperature_delta = -5
+detect_thin_wall = 0
+top_surface_line_width = 0.42
+top_surface_speed = 50
+travel_speed = 150
+enable_prime_tower = 0
+prime_tower_width = 60
+xy_hole_compensation = 0
+xy_contour_compensation = 0
+max_travel_detour_distance = 0
+bottom_surface_pattern = monotonic
+bottom_shell_layers = 4
+bottom_shell_thickness = 0
+brim_object_gap = 0.1
+compatible_printers_condition = 
+top_surface_acceleration = 2500
+draft_shield = disabled
+enable_arc_fitting = 1
+wall_infill_order = inner wall/outer wall/infill
+initial_layer_acceleration = 500
+travel_acceleration = 2500
+inner_wall_acceleration = 2000
+ironing_flow = 15%
+ironing_spacing = 0.1
+ironing_speed = 20
+ironing_type = no ironing
+layer_height = 0.2
+overhang_1_4_speed = 0
+overhang_2_4_speed = 60
+overhang_3_4_speed = 30
+overhang_4_4_speed = 10
+skirt_loops = 0
+resolution = 0.012
+
+top_surface_pattern = monotonic
+top_shell_layers = 4
+top_shell_thickness = 0.8
+initial_layer_infill_speed = 80
+wipe_tower_no_sparse_layers = 0
+accel_to_decel_enable = 1
+accel_to_decel_factor = 25
+acceleration_limit_mess = [[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]
+acceleration_limit_mess_enable = 0
+ai_infill = 0
+alternate_extra_wall = 0
+bottom_solid_infill_flow_ratio = 1
+bridge_acceleration = 50%
+bridge_angle = 0
+bridge_density = 100%
+brim_ears_detection_length = 1
+brim_ears_max_angle = 125
+brim_type = no_brim
+counterbore_hole_bridging = none
+default_jerk = 10
+detect_narrow_internal_solid_infill = 1
+dont_filter_internal_bridges = disabled
+elefant_foot_compensation_layers = 1
+enable_overhang_speed = 1
+enforce_support_layers = 0
+ensure_vertical_shell_thickness = ensure_all
+exclude_object = 0
+extra_perimeters_on_overhangs = 0
+filter_out_gap_fill = 0
+flush_into_infill = 0
+flush_into_objects = 0
+flush_into_support = 1
+fuzzy_skin = none
+fuzzy_skin_first_layer = 0
+fuzzy_skin_point_distance = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_target = everywhere
+gcode_add_line_number = 0
+gcode_comments = 0
+gcode_label_objects = 1
+hole_to_polyhole = 0
+hole_to_polyhole_threshold = 0.01
+hole_to_polyhole_twisted = 1
+independent_support_layer_height = 1
+infill_anchor = 400%
+infill_anchor_max = 20
+infill_jerk = 10
+initial_layer_jerk = 10
+initial_layer_min_bead_width = 85%
+initial_layer_travel_speed = 100%
+inner_wall_jerk = 10
+internal_bridge_flow = 1
+internal_bridge_speed = 150%
+internal_solid_infill_acceleration = 100%
+internal_solid_infill_pattern = monotonic
+ironing_angle = -1
+ironing_pattern = zig-zag
+ironing_support_layer = 0
+is_infill_first = 0
+make_overhang_printable = 0
+make_overhang_printable_angle = 55
+make_overhang_printable_hole_size = 0
+material_flow_dependent_temperature = 0
+material_flow_temp_graph = [[3.0,210],[10.0,220],[12.0,230]]
+max_bridge_length = 10
+max_volumetric_extrusion_rate_slope = 0
+max_volumetric_extrusion_rate_slope_segment_length = 3
+min_bead_width = 85%
+min_feature_size = 25%
+min_length_factor = 0.5
+min_width_top_surface = 300%
+minimum_support_area = 5
+mmu_segmented_region_interlocking_depth = 0
+mmu_segmented_region_max_width = 0
+only_one_wall_first_layer = 0
+only_one_wall_top = 1
+ooze_prevention = 0
+outer_wall_acceleration = 1000
+outer_wall_jerk = 10
+overhang_reverse = 0
+overhang_reverse_internal_only = 0
+overhang_reverse_threshold = 50%
+overhang_speed_classic = 0
+precise_outer_wall = 0
+prime_tower_brim_width = 3
+prime_tower_enhance_type = chamfer
+prime_volume = 45
+print_flow_ratio = 1
+print_order = default
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 2
+role_based_wipe_speed = 0
+scarf_angle_threshold = 155
+scarf_joint_flow_ratio = 1
+scarf_joint_speed = 100%
+scarf_overhang_threshold = 40%
+seam_gap = 10%
+seam_slope_conditional = 0
+seam_slope_entire_loop = 0
+seam_slope_inner_walls = 0
+seam_slope_min_length = 20
+seam_slope_start_height = 0
+seam_slope_steps = 10
+seam_slope_type = none
+single_extruder_multi_material_priming = 0
+skirt_speed = 50
+slice_closing_radius = 0.049
+slicing_mode = regular
+slow_down_layers = 0
+slowdown_for_curled_perimeters = 0
+small_area_infill_flow_compensation = 0
+small_area_infill_flow_compensation_model = 0,0;"\n0.2,0.4444";"\n0.4,0.6145";"\n0.6,0.7059";"\n0.8,0.7619";"\n1.5,0.8571";"\n2,0.8889";"\n3,0.9231";"\n5,0.9520";"\n10,1"
+small_perimeter_speed = 50%
+small_perimeter_threshold = 0
+solid_infill_filament = 1
+sparse_infill_acceleration = 100%
+sparse_infill_filament = 1
+speed_limit_to_height = [[100,150,100,6000],[150,200,80,5500],[200,250,60,5000]]
+speed_limit_to_height_enable = 0
+spiral_mode_max_xy_smoothing = 200%
+spiral_mode_smooth = 0
+staggered_inner_seams = 1
+
+thick_bridges = 0
+thick_internal_bridges = 1
+timelapse_type = 0
+top_solid_infill_flow_ratio = 1
+top_surface_jerk = 8
+travel_jerk = 10
+travel_speed_z = 0
+
+wall_direction = auto
+wall_distribution_count = 1
+wall_filament = 1
+wall_generator = arachne
+wall_sequence = inner wall/outer wall
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 100%
+wipe_before_external_loop = 0
+wipe_on_loops = 0
+wipe_speed = 100%
+wipe_tower_bridging = 10
+wipe_tower_cone_angle = 0
+wipe_tower_extra_spacing = 100%
+wipe_tower_rotation_angle = 0
+wiping_volumes_extruders = 70,70,70,70,70,70,70,70,70,70

print_config/prusa_slicer/supports/no_support.ini

@@ -0,0 +1,50 @@
+[metadata]
+show_name = No Support
+
+
+[settings]
+enable_support = 0
+support_filament = 0
+support_line_width = 0.4
+support_interface_filament = 0
+support_on_build_plate_only = 0
+support_top_z_distance = 0.2
+support_interface_loop_pattern = 0
+support_interface_top_layers = 2
+support_interface_spacing = 0.5
+support_interface_speed = 100%
+support_base_pattern = rectilinear
+support_base_pattern_spacing = 2.5
+support_speed = 50
+support_threshold_angle = 30
+support_object_xy_distance = 0.35
+
+support_type = normal(auto)
+support_style = default
+support_interface_bottom_layers = 2
+tree_support_branch_angle = 45
+tree_support_wall_count = 0
+
+support_angle = 0
+support_bottom_interface_spacing = 0.5
+support_bottom_z_distance = 0.2
+support_critical_regions_only = 0
+support_expansion = 0
+support_interface_not_for_body = 1
+support_interface_pattern = auto
+support_remove_small_overhang = 1
+support_xy_overrides_z = xy_overrides_z
+
+tree_support_adaptive_layer_height = 1
+tree_support_angle_slow = 25
+tree_support_auto_brim = 1
+tree_support_branch_angle_organic = 40
+tree_support_branch_diameter = 2
+tree_support_branch_diameter_angle = 5
+tree_support_branch_diameter_double_wall = 3
+tree_support_branch_diameter_organic = 2
+tree_support_branch_distance = 5
+tree_support_branch_distance_organic = 1
+tree_support_brim_width = 3
+tree_support_tip_diameter = 0.8
+tree_support_top_rate = 30%

tmp/patch_routes.py

@@ -1,36 +1,60 @@
 import re
 
-with open('app/routes.py', 'r', encoding='utf-8') as f:
+def update_main_routes():
-    text = f.read()
+    with open('app/routes/main_routes.py', 'r', encoding='utf-8') as f:
+        text = f.read()
 
-old_str = """    print_file = PrintFile(
+    # Create the API endpoint
-        filename=unique_filename,
+    api_endpoint = """
-        original_filename=f"{combined_name}.stl",
+@main_bp.route('/api/engine_options/<engine_name>')
-        file_type='stl',
+@login_required
-        user_id=current_user.id,
+def engine_options(engine_name):
-        status='waiting'
+    from app.utils.slice_engines import get_slicer_engine
-    )
+    engine = get_slicer_engine(engine_name)
-    db.session.add(print_file)
+    presets = engine.get_quality_presets(current_app)
-    db.session.commit()
+    patterns = engine.get_support_patterns()
+    return jsonify({'presets': presets, 'support_patterns': patterns})
+"""
+    if "def engine_options(engine_name):" not in text:
+        text += api_endpoint
+        
+    # Overwrite the old get_quality_presets
+    old_func = re.search(r'def get_quality_presets\(\):.*?(?=@main_bp\.route|\Z)', text, re.DOTALL)
+    if old_func:
+        text = text.replace(old_func.group(0), "")
+        
+    # Replace in plater()
+    if 'presets = get_quality_presets()' in text:
+        text = text.replace("presets = get_quality_presets()", "")
     
-    slice_stl_task(print_file.id, merged_filepath, quality)"""
+    with open('app/routes/main_routes.py', 'w', encoding='utf-8') as f:
+        f.write(text)
 
-new_str = """    print_file = PrintFile(
+def update_admin_routes():
-        filename=unique_filename,
+    with open('app/routes/admin_routes.py', 'r', encoding='utf-8') as f:
-        original_filename=f"{combined_name}.stl",
+        text = f.read()
-        file_type='stl',
+        
-        user_id=current_user.id,
+    text = re.sub(r'from app\.utils\.print_config import get_quality_presets\n', '', text)
-        status='merging'
-    )
-    db.session.add(print_file)
-    db.session.commit()
     
-    from .tasks import merge_and_slice_task
+    old_ret = """    configs = {c.key: c.value for c in SystemConfig.query.all()}
-    merge_and_slice_task(print_file.id, inputs, merged_filepath, quality)"""
+    presets = get_quality_presets()
+    engines = get_all_engines()
+    return render_template('admin/settings.html', configs=configs, presets=presets, engines=engines)"""
+    
+    new_ret = """    configs = {c.key: c.value for c in SystemConfig.query.all()}
+    engines = get_all_engines()
+    return render_template('admin/settings.html', configs=configs, engines=engines)"""
+    
+    if old_ret in text:
+        text = text.replace(old_ret, new_ret)
+        
+    old_func = re.search(r'def get_quality_presets\(\):.*?(?=@admin_bp\.route|\Z)', text, re.DOTALL)
+    if old_func:
+        text = text.replace(old_func.group(0), "")
+        
+    with open('app/routes/admin_routes.py', 'w', encoding='utf-8') as f:
+        f.write(text)
 
-if old_str in text:
+update_main_routes()
-    with open('app/routes.py', 'w', encoding='utf-8') as f:
+update_admin_routes()
-        f.write(text.replace(old_str, new_str))
+print("Routes patched")
-    print("Patched successfully")
-else:
-    print("Old string not found")

tmp_get_ini_from_json.py

@@ -0,0 +1,21 @@
+import json
+import os
+
+
+if __name__ == "__main__":
+    all_files = os.sys.argv[1:]
+    print(all_files)
+    keys = {}
+    for file in all_files:
+        js = json.load(open(file))
+        for k, v in js.items():
+            if k in ['filament_id','setting_id',"type","name","from","instantiation","inherits","compatible_printers","filename_format"]:
+                continue
+            if type(v) == list:
+                v = v[0]
+            keys[k] = v
+    print(json.dumps(keys))
+    with open("0.08mm_Extra_Fine.ini", "w") as f:
+        for k, v in keys.items():
+            v_str = v.replace('\n', '\\n')
+            f.write(f"{k} = {v_str}\n")